11 open source boards using the LSM6DSRTR

Real designs built with the LSM6DSRTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the LSM6DSRTR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LSM6DSRTR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The SDX pin is tied to GND on 4 of 6 designs (a signal on 2).
  • The SCX pin is tied to GND on 4 of 6 designs (a signal on 2).
SDXpin 2Connected to: GND 67% · a signal 33%
  • Pull-up to VDD on 33% · 4.7 kΩ (2)
SCXpin 3Connected to: GND 67% · a signal 33%
  • Pull-up to VDD on 33% · 4.7 kΩ (2)
VDDIOpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (11), 10 µF (2), 1 µF (1)
GNDpin 6, 7Connected to: GND 100%
VDDpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (12), 1 µF (1), 10 µF (1)
NCpin 10, 11Connected to: Not connected 100%
CSpin 12Connected to: The microcontroller 50% · 3.3V 33%
  • Capacitor to GND on 33% · 100 nF (5), 10 µF (2)
SCLpin 13Connected to: The microcontroller 83%, LSM6DSRTR 33%, a connector 33%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2), 1 kΩ (1)
SDApin 14Connected to: The microcontroller 83%, LSM6DSRTR 33%, a connector 33%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2), 1 kΩ (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GC Ultimate Main Board R5 by HandHeldLegend, Procon gcc main pcb by HandHeldLegend, LSM6DSR-Breakout by HackableElectronics and Drone mark4 by Keyrim.

The LSM6DSRTR in open source designs

The gallery holds 11 open source boards using the LSM6DSRTR from 6 GitHub repositories; a typical one measures about 110.9 × 59.8 mm and carries around 107 components.

64% use four copper layers or more, and 27% carry an open source license.

The most starred is GC Ultimate Main Board R5 by HandHeldLegend.

Microcontrollers on boards using the LSM6DSRTR

LSM6DSRTR: common questions

Where can I find a LSM6DSRTR reference design?

Each of the 11 boards on this page is a real design using the LSM6DSRTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LSM6DSRTR VDDIO pin?

The VDDIO pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the LSM6DSRTR.

What decoupling capacitors do designs use on the LSM6DSRTR VDD pin?

The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the LSM6DSRTR.

How is the LSM6DSRTR SDX pin connected?

The SDX pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the LSM6DSRTR.

What parts are used alongside the LSM6DSRTR?

The BQ25180, GD25Q80EEIGR, RP2040, TPS63001DRCR and USBLC6-2P6 appear in the most repositories here.

Which microcontrollers do boards using the LSM6DSRTR use?

Most are built on RP2040/RP2350 (6), AVR/Arduino (2), ESP32 (1) and STM32 (1).

How big is a typical board using the LSM6DSRTR?

The median is 110.9 × 59.8 mm, and 36% are two-layer designs.

What is the most popular open source board using the LSM6DSRTR?

By GitHub stars, GC Ultimate Main Board R5 by HandHeldLegend, with 61 stars.

Can I simulate one of these boards using the LSM6DSRTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part