TrainTracker
wcbq·TrainTracker·KiCad/traintracker/traintracker.kicad_pcb
About the TrainTracker PCB
TrainTracker is an open source ESP32 PCB design by wcbq, published on GitHub. It is a 2-layer board measuring 84.8 × 64.3 mm, with 64 components from 6 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the 74HC595, AMS1117-3.3 and D168K. By type, the board carries 49 resistors, 14 ICs and 1 capacitor.
It belongs with the displays & leds designs in this gallery.
From the project
ESP32 Project to display train and bus times in a fixed locations using the MTA's apis
Main components on the TrainTracker
TrainTracker bill of materials (BOM)
64 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm | U1, U3, U4, U5, U6, U7 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U8 |
| 6 | D168K | D1X8K | U15, U16, U17, U18, U19, U20 |
| 1 | C_Small_US | CP_Elec_3x5.3 | C2 |
| 49 | R_US | R_0201_0603Metric | R1, R2, R3, R4, R5, R6, R7, R8 +41 |
TrainTracker design files
The KiCad project lives in the wcbq/TrainTracker repository on GitHub; these links point at the commit this page was built from.
TrainTracker: common questions
What microcontroller does the TrainTracker use?
The TrainTracker is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the TrainTracker PCB?
The TrainTracker measures 84.8 × 64.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TrainTracker?
64 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the TrainTracker design files?
From the wcbq/TrainTracker repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TrainTracker design in my own project?
The repository has no license, so all rights stay with wcbq. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TrainTracker without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k