HardLabs

OneInchEye

will127534·OneInchEye

OneInchEye PCB layout, top view — open source board by will127534
Simulate this board

About the OneInchEye PCB

OneInchEye is an open source PCB design by will127534, published on GitHub under the MIT license. It is a 4-layer board measuring 39 × 39 mm, with 79 components from 30 distinct parts.

Other key parts include the LP5907MFX-1.8, TPS7A90, IMX283EQJC, TMP117AIDRVR and ECS-2520S18-240-FN. By type, the board carries 46 capacitors, 11 resistors, 8 ICs, 5 inductors and 4 connectors.

It belongs with the sensors and test & measurement designs in this gallery.

From the project

A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi

OneInchEye captures stunning high-resolution images and videos with improved low-light performance and dynamic range. It's perfect for photography enthusiasts, developers, and makers who want to level up their Raspberry Pi projects with a powerful camera. The board also features a TMP117 temperature sensor for accurate temperature readings.

Please note that the OneInchEye is not compatible with most Raspberry Pi boards because it requires 22-pin FPC connector with 4-lane MIPI-CSI interface. Ensure compatibility with your specific board before proceeding.

OneInchEye, from the project README
From the project README

Main components on the OneInchEye

LP5907MFX-1.8TPS7A90IMX283EQJCTMP117AIDRVRECS-2520S18-240-FNAP3418KTR-G1TCA9406DCICM-42688-P

OneInchEye bill of materials (BOM)

79 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LP5907MFX-1.8
U1
1
TPS7A90
U2
1
IMX283EQJC
U3
1
TMP117AIDRVR
U4
1
ECS-2520S18-240-FN
ECS-2520S18-240-FN-TR
U5
1
AP3418KTR-G1
U6
1
TCA9406DC
U7
1
ICM-42688-P
U9
1
CONN_01X22_SHIELDED
Conn_01x22_Shielded
J1
1
CONN_01X04_SHIELDED
Conn_01x04_Shielded
J2
2
Conn_Coaxial
J3, J4
5
KCZ1210AH900HRTD25
FL1, FL2, FL3, FL4, FL5
3
BLM18KG102SN1D
FB1, FB2, FB3
1
BLM15PX800SN1D
BLM18KG102SN1D
FB4
1
DFE201210U-2R2M=P2
L1
16
1UF
1uF
C1, C3, C6, C9, C11, C14, C16, C17 +8
3
1000PF
1000pF
C2, C5, C8
12
100NF
100nF
C4, C7, C10, C12, C15, C22, C24, C30 +4
7
4.7UF
4.7uF
C13, C18, C25, C28, C32, C33, C38
1
NFM18CC101R1C3D
C26
Show 10 more
QtyPartRefs
2
10UF
10uF
C34, C47
1
22UF
22uF
C37
1
100NF
100n
C42
2
10NF
10nF
C43, C46
1
2.2UF
2.2uF
C44
6
10K
R1, R4, R5, R6, R7, R9
2
DNP
R2, R3
1
22R
ERJ-2RKF22R0X
R8
1
3.01K
R10
1
1.15K
R11

OneInchEye design files

The KiCad project lives in the will127534/OneInchEye repository on GitHub; these links point at the commit this page was built from.

OneInchEye: common questions

How big is the OneInchEye PCB?

The OneInchEye measures 39 × 39 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the OneInchEye?

79 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the OneInchEye design files?

From the will127534/OneInchEye repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the OneInchEye design in my own project?

Yes, under the terms of its MIT license, which will127534 chose for the repository.

Similar boards