4 open source boards using the AP3418KTR-G1
Real designs built with the AP3418KTR-G1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FourThirdsEye
will127534
47 × 47 mm106 parts4LMIT377
OneInchEye
39 × 39 mm79 parts4LMIT346
STM32StarlightEye
39 × 39 mm111 parts4LMIT318
NXPR1000AX
pluggee
175 × 68.5 mm138 parts4LGPL-3.015
The AP3418KTR-G1 in open source designs
The gallery holds 4 open source boards using the AP3418KTR-G1 from 4 GitHub repositories; a typical one measures about 43 × 43 mm and carries around 109 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is FourThirdsEye by will127534.
Parts used alongside the AP3418KTR-G1
What boards using the AP3418KTR-G1 are built for
AP3418KTR-G1: common questions
Where can I find a AP3418KTR-G1 reference design?
Each of the 4 boards on this page is a real design using the AP3418KTR-G1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AP3418KTR-G1?
The ICM-42688-P, LP5907MFX-1.8, TCA9406DC, TMP117AIDRVR and TPS7A90 appear in the most repositories here.
Which microcontrollers do boards using the AP3418KTR-G1 use?
Most are built on NXP (1) and STM32 (1).
How big is a typical board using the AP3418KTR-G1?
The median is 43 × 43 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP3418KTR-G1?
By GitHub stars, FourThirdsEye by will127534, with 377 stars.
Can I simulate one of these boards using the AP3418KTR-G1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.