11 open source boards using the TCA9406DC

Real designs built with the TCA9406DC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TCA9406DC

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TCA9406DC connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 nF).
  • The VCCB pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF).
  • The OE pin is tied to 1.8V on 7 of 9 designs.
SDA_Bpin 1Connected to: A connector 89%, TMP117AIDRVR 44%
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
GNDpin 2Connected to: GND 100%
VCCApin 3Connected to: 3.3V 89%
  • Decoupling capacitor on 89% · 100 nF (9), 10 nF (2), 1 µF (1)
OEpin 6Connected to: 1.8V 78%
VCCBpin 7Connected to: 3.3V 78% · a signal 22%
  • Decoupling capacitor on 89% · 100 nF (7), 1 µF (1)
SCL_Bpin 8Connected to: A connector 89%, TMP117AIDRVR 44%
  • Pull-up to 3.3V on 33% · 10 kΩ (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FourThirdsEye by will127534, OneInchEye by will127534, StarlightEye by will127534 and RPI5-CFE-Hat by will127534.

The TCA9406DC in open source designs

The gallery holds 11 open source boards using the TCA9406DC from 9 GitHub repositories; a typical one measures about 65 × 55.6 mm and carries around 106 components.

55% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.

The most starred is FourThirdsEye by will127534.

Microcontrollers on boards using the TCA9406DC

TCA9406DC: common questions

Where can I find a TCA9406DC reference design?

Each of the 11 boards on this page is a real design using the TCA9406DC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TCA9406DC VCCA pin?

The VCCA pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the TCA9406DC.

What decoupling capacitors do designs use on the TCA9406DC VCCB pin?

The VCCB pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the TCA9406DC.

How is the TCA9406DC OE pin connected?

The OE pin is tied to 1.8V on 7 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the TCA9406DC.

What parts are used alongside the TCA9406DC?

The TMP117AIDRVR, AP3418KTR-G1, ICM-42688-P, LP5907MFX-1.8 and TPS7A90 appear in the most repositories here.

Which microcontrollers do boards using the TCA9406DC use?

Most are built on ESP32 (4) and STM32 (2).

How big is a typical board using the TCA9406DC?

The median is 65 × 55.6 mm, and 55% are two-layer designs.

What is the most popular open source board using the TCA9406DC?

By GitHub stars, FourThirdsEye by will127534, with 384 stars.

Can I simulate one of these boards using the TCA9406DC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part