Dual power supply

williamjroche·Drone_Flight_Controller·dual_power_supply/dual_power_supply.kicad_pcb

Dual power supply PCB layout, top view — open source board by williamjroche

About the Dual power supply PCB

Dual power supply is an open source PCB design by williamjroche, published on GitHub under the MIT license. It is a 2-layer board measuring 45.7 × 23.9 mm, with 15 components from 8 distinct parts.

Other key parts include the LD1117S33TR_SOT223 and LD1117S50TR_SOT223. By type, the board carries 8 capacitors, 3 connectors, 2 ICs and 2 switches.

It belongs with the robotics & motion, power & battery and sensors designs in this gallery.

From the project

This is a drone project with a custom flight controller with custom firmware. Eventually I want it to be autonomous.

This is a Drone project with a custom flight controller and custom firmware that hopefully in the future uses computer vision for flight.

This is an ongoing project, and the flight controller is still in development. A prototype flight controller can be seen in the photo on the bottom. A more refined PCB implementation of this flight controller is in the works, named 'Atlas Flight Controller'. This board uses the rp2350A microcontroller from Raspberry Pi, micro-usb power and data, ICM-42688-P IMU chip (6-axis), BMP384 barometer, 16MB flash memory (W25Q128JVS), an automatic power switching…

Dual power supply, from the project README
From the project README

Main components on the Dual power supply

Dual power supply bill of materials (BOM)

15 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LD1117S33TR_SOT223
U1
1
LD1117S50TR_SOT223
U2
3
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J1, J2, J3
2
SW_DIP_X01
SW_DIP_x01
SW1, SW2
2
10UF
10uF
C2, C6
2
100NF
100nF
C3, C7
2
10NF
10nF
C4, C8
2
0.1UF
0.1uF
C5, C9

Dual power supply design files

The KiCad project lives in the williamjroche/Drone_Flight_Controller repository on GitHub; these links point at the commit this page was built from.

Dual power supply: common questions

How big is the Dual power supply PCB?

The Dual power supply measures 45.7 × 23.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dual power supply?

15 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dual power supply design files?

From the williamjroche/Drone_Flight_Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dual power supply design in my own project?

Yes, under the terms of its MIT license, which williamjroche chose for the repository.

More boards in Drone_Flight_Controller

Similar boards