Flight controller atlas

williamjroche·Drone_Flight_Controller·flight_controller_atlas/flight_controller_atlas.kicad_pcb

Flight controller atlas PCB layout, top view — open source RP2040/RP2350 board by williamjroche

About the Flight controller atlas PCB

Flight controller atlas is an open source RP2040/RP2350 PCB design by williamjroche, published on GitHub under the MIT license. It is a 4-layer board measuring 51 × 45 mm, with 66 components from 37 distinct parts.

Its main chip is the LD1117S33TR_SOT223, from the RP2040/RP2350 family. Other key parts include the LD1117S50TR_SOT223, LM3940IMPX-3.3_NOPB, W25Q128JVS, BMP384 and MIC5504-3.3YM5-TR. By type, the board carries 27 capacitors, 15 resistors, 12 connectors, 6 ICs, 1 transistor and 1 crystal.

It belongs with the robotics & motion, power & battery and sensors designs in this gallery.

From the project

This is a drone project with a custom flight controller with custom firmware. Eventually I want it to be autonomous.

This is a Drone project with a custom flight controller and custom firmware that hopefully in the future uses computer vision for flight.

This is an ongoing project, and the flight controller is still in development. A prototype flight controller can be seen in the photo on the bottom. A more refined PCB implementation of this flight controller is in the works, named 'Atlas Flight Controller'. This board uses the rp2350A microcontroller from Raspberry Pi, micro-usb power and data, ICM-42688-P IMU chip (6-axis), BMP384 barometer, 16MB flash memory (W25Q128JVS), an automatic power switching…

Flight controller atlas, from the project README
From the project README

Main components on the Flight controller atlas

Flight controller atlas bill of materials (BOM)

66 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LD1117S33TR_SOT223
RP2350A-QFN60
U1
1
LD1117S50TR_SOT223
ICM-20948
U2
1
LM3940IMPX-3.3_NOPB
U3
1
W25Q128JVS
U4
1
BMP384
U5
1
MIC5504-3.3YM5-TR
U7
1
DMP3099L
Q1
1
ABM8-272-T3
X1
1
SCREW_TERMINAL_01X02
USB_B_Micro
J1
1
SCREW_TERMINAL_01X02
Ext 5v
J2
1
SCREW_TERMINAL_01X02
SM03B-SRSS-TB
J3
8
Screw_Terminal_01x02
J4, J5, J6, J7, J8, J9, J10, J11
1
GND
J12
1
BLM15AX601SN1D
FL1
1
TL3365AF180QG
S1
1
LED
D1
1
3.3uH
L1
1
0.1uF
C1
1
10UF
0.1uF
C2
1
100NF
0.1uF
C3
Show 17 more
QtyPartRefs
1
10NF
.47uF
C4
1
0.1UF
33uF
C5
1
10UF
4.7uF
C6
1
100NF
4.7uF
C7
1
10NF
4.7uF
C8
1
0.1UF
100n
C9
13
100n
C10, C11, C12, C13, C14, C15, C16, C17 +5
1
4.7u
C19
2
15p
C22, C23
2
1uF
C24, C25
4
1k
R1, R2, R3, R10
2
10k
R4, R7
4
4.7k
R5, R8, R9, R15
1
100k
R6
2
27
R11, R12
1
330
R13
1
33
R14

Flight controller atlas design files

The KiCad project lives in the williamjroche/Drone_Flight_Controller repository on GitHub; these links point at the commit this page was built from.

Flight controller atlas: common questions

What microcontroller does the Flight controller atlas use?

The Flight controller atlas is built around the LD1117S33TR_SOT223, from the RP2040/RP2350 family.

How big is the Flight controller atlas PCB?

The Flight controller atlas measures 51 × 45 mm, has 4 copper layers and is 1 mm thick.

How many components are on the Flight controller atlas?

66 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Flight controller atlas design files?

From the williamjroche/Drone_Flight_Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Flight controller atlas design in my own project?

Yes, under the terms of its MIT license, which williamjroche chose for the repository.

Can I test firmware for the Flight controller atlas without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Drone_Flight_Controller

Similar boards