Klondike-Connect-4---2026

williamlin108·Klondike-Connect-4---2026·PCB/EPICS_Connect4.kicad_pcb

Klondike-Connect-4---2026 PCB layout, top view — open source ESP32 board by williamlin108

About the Klondike-Connect-4---2026 PCB

Klondike-Connect-4---2026 is an open source ESP32 PCB design by williamlin108, published on GitHub. It is a 4-layer board measuring 50 × 60 mm, with 68 components from 35 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the TPS54202DDC, STM32G474CBTx, SN74AHCT1G125DBVR, USBLC6-2SC6 and TMC2209. By type, the board carries 21 capacitors, 21 resistors, 8 connectors, 7 ICs, 5 diodes and 3 fuses.

It belongs with the robotics & motion and iot & wireless designs in this gallery.

From the project

Electronics Repo for Purdue EPICs Klondike Team, DL: William Lin

Electronics and firmware for the semi-automatic giant Connect 4 board built by EPICS at Purdue (Fall 2026) for Klondike Elementary School. A motorized rack-and-pinion slider releases the game pieces at the end of a round, and addressable LEDs plus a Wi-Fi web interface add interactive control.

- Automatic reset: a stepper-driven slider under the board lines up its holes with the columns so the pieces drop out - Wireless control: the ESP32 hosts a local Wi-Fi access point and a web control page - Addressable RGBW LEDs: two independent LED channels driven in real time by the STM32 - Safety…

Klondike-Connect-4---2026, from the project README
From the project README

Main components on the Klondike-Connect-4---2026

Klondike-Connect-4---2026 bill of materials (BOM)

68 components, 35 distinct parts.

QtyPartRefs
1
TPS54202DDC
U1
1
STM32G474CBTx
U2
2
SN74AHCT1G125DBVR
U3, U4
1
ESP32-C3-WROOM-02
U5
1
USBLC6-2SC6
U6
1
TMC2209
U7
1
+5V
J1
1
+12V
J2
1
EndA
J3
1
EndB
J4
1
LEDA
J5
1
LEDB
J6
1
MOTOR
J7
1
USB_C_Receptacle_USB2.0_14P
J8
1
6A
F1
2
2A
F2, F3
1
ESP.RST
SW1
1
ESP.BOOT
SW2
1
SMAJ5A
D1
2
SMF5.0A
D2, D3
Show 15 more
QtyPartRefs
2
4.5mA @ 1.8V
D4, D5
1
10uH
L1
4
22uF
C1, C2, C5, C6
6
0.1uF
C3, C12, C13, C14, C15, C16
1
56pF
C4
7
1uF
C7, C8, C9, C10, C11, C19, C20
2
10uF
C17, C18
1
100uF
C21
1
510k
R1
1
100k
R2
1
22.1k
R3
5
10k
R4, R13, R14, R15, R16
3
5.1k
R5, R18, R19
8
330
R6, R7, R8, R9, R10, R11, R12, R17
2
22
R20, R21

Klondike-Connect-4---2026 design files

The KiCad project lives in the williamlin108/Klondike-Connect-4---2026 repository on GitHub; these links point at the commit this page was built from.

Klondike-Connect-4---2026: common questions

What microcontroller does the Klondike-Connect-4---2026 use?

The Klondike-Connect-4---2026 is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Klondike-Connect-4---2026 PCB?

The Klondike-Connect-4---2026 measures 50 × 60 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Klondike-Connect-4---2026?

68 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the Klondike-Connect-4---2026 design files?

From the williamlin108/Klondike-Connect-4---2026 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Klondike-Connect-4---2026 design in my own project?

The repository has no license, so all rights stay with williamlin108. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Klondike-Connect-4---2026 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards