Template board
Wust-Sat·template_board·template_board/template_board.kicad_pcb
About the Template board
Template board is an open source STM32 PCB design by Wust-Sat, published on GitHub under the MIT license. It is a 4-layer board measuring 90.2 × 95.9 mm, with 117 components from 77 distinct parts.
Its main chip is the STM32F103CB, from the STM32 family. Other key parts include the CH334R, FM24CL16B, AZ1117-3.3, STM32U575RITx and IP4220CZ6. By type, the board carries 48 resistors, 39 capacitors, 9 ICs, 8 diodes, 4 crystals and 3 switches.
Main components on the Template board
Template board bill of materials (BOM)
117 components, 77 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH334R IP4220CZ6 | SOT-23-6 | U1 |
| 1 | FM24CL16B LM74700 | SOT-23-6 | U2 |
| 1 | STM32F103CB IP4220CZ6 | SOT-23-6 | U3 |
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | STM32U575RITx | LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | IP4220CZ6 TJA1145T | SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | STM32F103CBTx | LQFP-48_7x7mm_P0.5mm | U7 |
| 1 | FSUSB42UMX | UQFN-10_1.4x1.8mm_P0.4mm | U11 |
| 1 | CH334P | QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U12 |
| 1 | S9013 | SOT-23 | Q2 |
| 1 | AO3400A | SOT-23 | Q3 |
| 1 | Q13FC1350000400 Seiko Epson | FC-135R_L3.2-W1.5 | X3 |
| 1 | X322512MSB4SI Yangxing Tech | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X4 |
| 1 | 8 MHz | CRYSTAL-SMD_4P-L3.2-W2.5-BL | Y5 |
| 1 | 12Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y6 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 2 | ESQ-126-14-G-D | ESQ-126-Y-X-D | H1, H2 |
| 2 | SW_Push | TS1088R02026 | SW1, SW3 |
| 1 | SW_DIP_x01 | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW2 |
| 1 | SS34 Green Everlight Elec | D_0603 | D1 |
Show 57 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | USR_LED1 Blue Everlight Elec | D_0603 | D2, D3 |
| 1 | USR_LED1 Red Hubei KENTO Elec | D_0603 | D7 |
| 2 | Green Everlight Elec | D_0603 | D8, D10 |
| 1 | Red Hubei KENTO Elec | D_0603 | D9 |
| 1 | Blue Everlight Elec | D_0603 | D12 |
| 1 | C1017 ~ Sunlord | FB_0603 | FB1 |
| 1 | 100N 4.7uF Samsung Electro-Mechanics | C_0402 | C1 |
| 11 | 100N 100nF Samsung Electro-Mechanics | C_0402 | C2, C3, C4, C5, C9, C13, C17, C25 +3 |
| 2 | 18pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C6, C59 |
| 1 | 4.7U 1uF Samsung Electro-Mechanics | C_0402 | C7 |
| 1 | 4.7U 100nF Samsung Electro-Mechanics | C_0402 | C10 |
| 1 | 17P 10uF Samsung Electro-Mechanics | C_0402 | C11 |
| 1 | 17P 100nF Samsung Electro-Mechanics | C_0402 | C12 |
| 2 | 100N 10uF Samsung Electro-Mechanics | C_0402 | C14, C15 |
| 1 | 100N 100nF 50V Y5V | C_0402_1005Metric | C16 |
| 1 | 20PF 100nF Samsung Electro-Mechanics | C_0402 | C18 |
| 1 | 20PF 18pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C19 |
| 4 | 100nF Samsung Electro-Mechanics | C_0402 | C26, C28, C29, C30 |
| 1 | 1uF Samsung Electro-Mechanics | C_0402 | C31 |
| 1 | 10nF Samsung Electro-Mechanics | C_0402 | C32 |
| 2 | 10N 100nF Samsung Electro-Mechanics | C_0402 | C44, C45 |
| 1 | 2.2U 100nF Samsung Electro-Mechanics | C_0402 | C46 |
| 1 | 47U 100nF Samsung Electro-Mechanics | C_0402 | C47 |
| 1 | 2.2U 10uF Samsung Electro-Mechanics | C_0402 | C48 |
| 1 | 47U 1uF Samsung Electro-Mechanics | C_0402 | C49 |
| 1 | 4.7uF Samsung Electro-Mechanics | C_0402 | C50 |
| 1 | 47U 18pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C51 |
| 1 | 100N 22pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C58 |
| 1 | 22pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C60 |
| 2 | 220Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R1, R62 |
| 1 | 10K 120Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R2 |
| 2 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R3, R68 |
| 1 | 10K 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R4 |
| 2 | 4K7 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R5, R13 |
| 1 | 4K7 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R6 |
| 1 | 10K 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R7 |
| 8 | 22Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R8, R9, R15, R44, R64, R65, R66, R67 |
| 1 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R10 |
| 2 | 100K 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R11, R12 |
| 1 | 10K 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R14 |
| 1 | 4K7 22Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R16 |
| 2 | 100R 22Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R17, R20 |
| 1 | 10K 22Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R18 |
| 1 | 220R 22Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R19 |
| 1 | 39K 1.2kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R21 |
| 1 | 1K5 1.2kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R22 |
| 2 | 100Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R25, R55 |
| 6 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R26, R48, R49, R53, R59, R61 |
| 1 | 43K 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R27 |
| 3 | 1.2kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R30, R52, R69 |
| 1 | C284595 22Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R37 |
| 1 | 39kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R54 |
| 1 | 100K 330Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R56 |
| 1 | C77605 5.1kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R57 |
| 1 | 5.1kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R58 |
| 1 | 22kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R60 |
| 1 | 470Ω UNI-ROYAL(Uniroyal Elec) | R_0402 | R63 |
Template board design files
The KiCad project lives in the Wust-Sat/template_board repository on GitHub; these links point at the commit this page was built from.
Template board: common questions
What microcontroller does the Template board use?
The Template board is built around the STM32F103CB, from the STM32 family.
How big is the Template board?
The Template board measures 90.2 × 95.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Template board?
117 components, from 77 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Template board design files?
From the Wust-Sat/template_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Template board design in my own project?
Yes, under the terms of its MIT license, which Wust-Sat chose for the repository.
Can I test firmware for the Template board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k