3 open source boards using the STM32F103CB
Real designs built with the STM32F103CB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Stm32....c breakout
electroniceel
25.4 × 50.8 mm59 parts2LCC-BY-4.020RP2040/RP2350
UMMTJ Mainboard
vamatis
100 × 100 mm142 parts4LNo license0STM32
Template board
Wust-Sat
90.2 × 95.9 mm117 parts4LMIT0
The STM32F103CB in open source designs
The gallery holds 3 open source boards using the STM32F103CB from 3 GitHub repositories; a typical one measures about 90.2 × 95.9 mm and carries around 117 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Stm32....c breakout by electroniceel.
Parts used alongside the STM32F103CB
Microcontrollers on boards using the STM32F103CB
What boards using the STM32F103CB are built for
STM32F103CB: common questions
Where can I find a STM32F103CB reference design?
Each of the 3 boards on this page is a real design using the STM32F103CB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F103CB use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the STM32F103CB?
The median is 90.2 × 95.9 mm, and 33% are two-layer designs.
What is the most popular open source board using the STM32F103CB?
By GitHub stars, Stm32....c breakout by electroniceel, with 20 stars.
Can I simulate one of these boards using the STM32F103CB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.