ASPECT2
xboxoneresearch·ASPECT2-PCB·pcb/ASPECT2.kicad_pcb
About the ASPECT2 PCB
ASPECT2 is an open source STM32 PCB design by xboxoneresearch, published on GitHub. It is a 4-layer board measuring 60 × 60 mm, with 116 components from 42 distinct parts.
Its main chip is the STM32G031J6Mx, from the STM32 family. Other key parts include the 93LC56B, SN74CB3T3245PWR, SN74AUP2G07DCKR, SN74LVC1G06DCKR and 74LVC1G07DBV. By type, the board carries 49 resistors, 31 capacitors, 13 ICs, 8 diodes, 6 connectors and 4 test points.
It belongs with the displays & leds, dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
Facet2 FabA PCB Clone
Development board for Xbox One / Xbox Series consoles, based mostly on blurry PCB images.
Allows for POST-Code monitoring (via I2C) and reading flash via SPI.
On some development kits, there are more features available.
KiCad files for the PCB / schematics EEPROM template for FTPROG STM32 firmware * FACET breakout board
* Devkit exclusive: Requires specific flavor of bootloaders or certain Certificate capabilities.

Main components on the ASPECT2
ASPECT2 bill of materials (BOM)
116 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 93LC56B | SOT-23-6 | U1 |
| 2 | SN74CB3T3245PWR | TSSOP-20_4.4x6.5mm_P0.65mm | U2, U4 |
| 1 | SN74AUP2G07DCKR | SOT-363_SC-70-6 | U3 |
| 1 | SN74LVC1G06DCKR | SOT-353_SC-70-5 | U5 |
| 1 | 74LVC1G07DBV | SOT-23-5 | U6 |
| 1 | FT4232H | LQFP-64_10x10mm_P0.5mm | U7 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U8 |
| 1 | ISO1540 | SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | STM32G031J6Mx | SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 2 | SN74LVC2G06DCKR | SOT-363_SC-70-6 | U13, U14 |
| 1 | TLV75533PDBVR | SOT-23-5 | U15 |
| 1 | XTAL 12Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_02x13P_SMD | PinHeader_2x13_P2.00mm_Vertical_SMD | J1 |
| 1 | Conn_01x04_OLED_SSD1306 | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | JST B10B-PHDSS-B | JST_PHD_B10B-PHDSS_2x05_P2.00mm_Vertical | J3 |
| 1 | AARDVARK | PinHeader_2x02_P2.00mm_Vertical | J4 |
| 1 | Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P1.27mm_Vertical_SMD | J5 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J6 |
| 1 | RESET | SW_SPST_SKQG_WithoutStem | SW1 |
| 1 | SW_Push_STM32 | SW_SPST_TS-1088-xR020 | SW2 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TestPoint | TestPoint_Keystone_5019_Miniature | TP1, TP2, TP3, TP4 |
| 3 | red LED | LED_0603_1608Metric | D1, D2, D4 |
| 1 | green LED | LED_0603_1608Metric | D3 |
| 4 | blue LED | LED_0603_1608Metric | D7, D8, D9, D10 |
| 2 | 600R | L_0603_1608Metric | L3, L4 |
| 12 | 1 uF | C_0603_1608Metric | C1, C2, C3, C5, C6, C7, C8, C9 +4 |
| 5 | 4.7 uF | C_0603_1608Metric | C4, C18, C20, C31, C32 |
| 2 | 30 pF | C_0402_1005Metric | C10, C12 |
| 11 | 0.1 uF | C_0402_1005Metric | C11, C13, C19, C21, C22, C23, C24, C25 +3 |
| 1 | 0.47 uF | C_0603_1608Metric | C16 |
| 5 | 10k | R_0402_1005Metric | R1, R2, R6, R16, R25 |
| 1 | 2k | R_0402_1005Metric | R3 |
| 1 | 0 | R_1206_3216Metric | R4 |
| 2 | 5k1 | R_0402_1005Metric | R5, R20 |
| 2 | 4k7 | R_0402_1005Metric | R7, R8 |
| 9 | 100 | R_0402_1005Metric | R9, R10, R31, R32, R41, R42, R43, R44 +1 |
| 12 | 33 | R_0402_1005Metric | R11, R12, R14, R22, R24, R29, R34, R36 +4 |
| 10 | 0 | R_0402_1005Metric | R13, R15, R17, R23, R26, R27, R28, R33 +2 |
| 4 | 2K2 | R_0402_1005Metric | R18, R46, R47, R48 |
| 1 | 12K | R_0402_1005Metric | R21 |
| 1 | 150 | R_0402_1005Metric | R30 |
| 1 | 1k | R_0402_1005Metric | R50 |
ASPECT2 design files
The KiCad project lives in the xboxoneresearch/ASPECT2-PCB repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/ASPECT2.kicad_pcb
- Schematicpcb/ASPECT2.kicad_sch
ASPECT2: common questions
What microcontroller does the ASPECT2 use?
The ASPECT2 is built around the STM32G031J6Mx, from the STM32 family.
How big is the ASPECT2 PCB?
The ASPECT2 measures 60 × 60 mm, has 4 copper layers and is 1.5842 mm thick.
How many components are on the ASPECT2?
116 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the ASPECT2 design files?
From the xboxoneresearch/ASPECT2-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ASPECT2 design in my own project?
The repository has no license, so all rights stay with xboxoneresearch. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ASPECT2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ASPECT2-PCB
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k