Hardware
About the Hardware PCB
Hardware is an open source PCB design by xtarke, published on GitHub. It is a 2-layer board measuring 135.8 × 56.2 mm, with 84 components from 26 distinct parts.
Other key parts include the LM393, TCRT5000, LM324 and HC-05. By type, the board carries 35 resistors, 14 connectors, 12 transistors, 12 diodes, 5 ICs and 4 capacitors.
It belongs with the power & battery designs in this gallery.
From the project
Baseado em Projeto PI3 de Lucas Odair Silva.
Baseado em Projeto PI3 de Lucas Odair Silva.
Projeto da placa eletrônica de potência para o acionamento de um Buggy 4x4. Um conector de 26-vias faz a conexão das seguintes placas:
- Arduino Uno - MSP-EXP430G2 - MSP-EXP430FR2355 - Raspberry Pi
- Controle independente dos motores (lado esquerdo e lado direito) - Sensores de velocidade Encoder - Monitoramento de bateria de LiPo - Sensor de linha dual - Sensor ultrassom - Comunicação Bluetooth (UART)
Main components on the Hardware
Hardware bill of materials (BOM)
84 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM393 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 2 | TCRT5000 | OPTO_TCRT5000 | U2, U5 |
| 1 | LM324 | SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | HC-05 | PinHeader_1x06_P2.54mm_Horizontal | U4 |
| 4 | BD140 | TO-126-3_Vertical | Q1, Q2, Q7, Q8 |
| 4 | BC548 | TO-92_Inline_Wide | Q3, Q4, Q9, Q10 |
| 4 | BD139 | TO-126-3_Vertical | Q5, Q6, Q11, Q12 |
| 4 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1, J3, J13, J14 |
| 3 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2, J10, J11 |
| 4 | Conn_01x02_Male | PinSocket_1x02_P2.54mm_Vertical | J4, J5, J6, J7 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J8, J9 |
| 1 | Conn_02x13_Odd_Even | PinSocket_2x13_P2.54mm_Vertical | J12 |
| 2 | R_POT_TRIM | Potentiometer_Piher_PT-6-V_Vertical | RV1, RV2 |
| 8 | DIODE | D_A-405_P2.54mm_Vertical_AnodeUp | D1, D2, D3, D4, D5, D6, D7, D8 |
| 3 | LED | LED_0805_2012Metric | D9, D10, D11 |
| 1 | D_Schottky | D_SMB | D12 |
| 2 | 1n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | 100n | C_0805_2012Metric | C3, C4 |
| 4 | 470 | R_0805_2012Metric | R1, R2, R5, R6 |
| 4 | 150 | R_0805_2012Metric | R3, R4, R7, R8 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 10k | R_0805_2012Metric | R9, R10, R15, R16, R26, R28 |
| 2 | 30k | R_0805_2012Metric | R11, R13 |
| 2 | 15k | R_0805_2012Metric | R12, R14 |
| 8 | R | R_0805_2012Metric | R17, R18, R19, R20, R21, R22, R23, R24 |
| 5 | 1K | R_0805_2012Metric | R25, R27, R29, R30, R35 |
| 4 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R31, R32, R33, R34 |
Hardware design files
The KiCad project lives in the xtarke/avrlibs repository on GitHub; these links point at the commit this page was built from.
Hardware: common questions
How big is the Hardware PCB?
The Hardware measures 135.8 × 56.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hardware?
84 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hardware design files?
From the xtarke/avrlibs repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Hardware design in my own project?
The repository has no license, so all rights stay with xtarke. Use it as a reference, and ask the author before reusing the design.
More boards in avrlibs
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k