J20 LSM6DS IMU

xtech·hw-openmower-utils·hw-openmower-utils-v1-j20-lsm6dsx/hw-openmower-utils-v1-j20-lsm6ds.kicad_pcb

J20 LSM6DS IMU PCB layout, top view — open source board by xtech

About the J20 LSM6DS IMU PCB

J20 LSM6DS IMU is an open source PCB design by xtech, published on GitHub. It is a 2-layer board measuring 26.5 × 10.9 mm, with 7 components from 5 distinct parts.

Other key parts include the LSM6DSOTR and XC6206P332MR. By type, the board carries 4 capacitors, 2 ICs and 1 resistor.

It belongs with the sensors designs in this gallery.

From the project

OpenMower V1 Mainboard 0.9.x up to 0.10.x requires an external plugged in IMU into J20. Unfortunately you don't get a non-faked MPU9250 anymore, so the only alternative you had, is the (non-cheap) WT901 for which you also need to solder an adapter (if you don't wanna block your s

OpenMower V1 Mainboard 0.9.x up to 0.10.x requires an external plugged in IMU into J20. Unfortunately you don't get a non-faked MPU9250 anymore, so the only alternative you had, is the (non-cheap) WT901 for which you also need to solder an adapter (if you don't wanna block your sound option).

I used and tested this only on an OpenMower (V1) 0.9.x Mainboard, but it should be compatible also for 0.9.x up to 0.13.x Mainboard variants. So you should be also able to use it for the case that you've a damaged or malfunction mainboard-assembled IMU (if you disable/remove the assembled one before).

J20 LSM6DS IMU, from the project README
From the project README

Main components on the J20 LSM6DS IMU

J20 LSM6DS IMU bill of materials (BOM)

7 components, 5 distinct parts.

QtyPartRefs
1
LSM6DSOTR
U1
1
XC6206P332MR
U2
2
1uF
C1, C2
2
100nF
C3, C4
1
22
R1

J20 LSM6DS IMU design files

The KiCad project lives in the xtech/hw-openmower-utils repository on GitHub; these links point at the commit this page was built from.

J20 LSM6DS IMU: common questions

How big is the J20 LSM6DS IMU PCB?

The J20 LSM6DS IMU measures 26.5 × 10.9 mm, has 2 copper layers and is 1.59 mm thick.

How many components are on the J20 LSM6DS IMU?

7 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the J20 LSM6DS IMU design files?

From the xtech/hw-openmower-utils repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the J20 LSM6DS IMU design in my own project?

The repository has no license, so all rights stay with xtech. Use it as a reference, and ask the author before reusing the design.

More boards in hw-openmower-utils

Similar boards