Smart-Ventilator
yesitha·Smart-Ventilator·KIcad/Smart Ventilator PCB/Smart Ventilator PCB.kicad_pcb
About the Smart-Ventilator PCB
Smart-Ventilator is an open source AVR/Arduino PCB design by yesitha, published on GitHub. It is a 2-layer board measuring 156.3 × 179.5 mm, with 69 components from 42 distinct parts.
Its main chip is the ATmega32-16A, from the AVR/Arduino family. Other key parts include the L7805, 86AB2-102, PCF8574A, L293D and MPX4250AP. By type, the board carries 13 ICs, 9 capacitors, 8 connectors, 8 diodes, 5 resistors and 3 transistors.
It belongs with the displays & leds and sensors designs in this gallery.
From the project
This project aims to develop a low cost smart ventilator system that requires minimum professional interaction to operate using Atmega32 Microcontroller
This project aims to develop a low cost smart ventilator system that requires minimum professional interaction to operate using Atmega32 Microcontroller
- To detect patient’s blood oxygen levels using the blood oxygen sensor (MAX30102) and to provide oxygen where necessary. - To monitor the patient’s vitals using the temperature sensor, pressure sensor, heart rate sensor and LCD display and send an alert message to a medical personnel using the gsm module or sound the speaker when it is necessary. - To monitor a patient's blood oxygen level and automatically switch off oxygen supply when not…

Main components on the Smart-Ventilator
Smart-Ventilator bill of materials (BOM)
69 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | L7805 | 78XXL | IC1, IC2 |
| 1 | ATmega32-16A | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | 86AB2-102 | KEYPAD_86AB2-102 | U2 |
| 1 | PCF8574A | DIL16 | U3 |
| 1 | L293D | DIP-16_W7.62mm | U4 |
| 2 | MPX4250AP | MPX4250AP | U5, U6 |
| 1 | MAX30205MTA+ | SON65P300X300X80-9N | U7 |
| 1 | MAX30102 | Maxim_OLGA-14_3.3x5.6mm_P0.8mm | U8 |
| 1 | LD1086DT18TR | TO-252-2 | U9 |
| 1 | OKI-78SR-3.3_1.5-W36-C | Converter_DCDC_Murata_OKI-78SR_Vertical | U10 |
| 1 | R-7812-0.5 | Converter_DCDC_RECOM_R-78E-0.5_THT | U11 |
| 3 | TIP41 | TO-220-3_Vertical | Q1, Q2, Q3 |
| 1 | Crystal | Crystal_AT310_D3.0mm_L10.0mm_Horizontal | Y1 |
| 1 | Conn_01x07_Female | PinHeader_1x07_P1.00mm_Vertical | J1 |
| 1 | Screw_Terminal_01x12 | TerminalBlock_4Ucon_1x12_P3.50mm_Horizontal | J2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_4Ucon_1x03_P3.50mm_Horizontal | J3 |
| 1 | Conn_01x04_Female | PinHeader_1x04_P1.00mm_Vertical | J4 |
| 1 | Conn_01x06_Female | PinHeader_1x06_P1.00mm_Vertical | J5 |
| 2 | Screw_Terminal_01x05 | TerminalBlock_4Ucon_1x05_P3.50mm_Horizontal | J6, J7 |
| 1 | Conn_01x01_Female | PinHeader_1x01_P1.00mm_Vertical | J8 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | CAP | CP_Elec_3x5.3 | 0.1uF1, 4.7uF1, 22pF1, 22pF2 |
| 8 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 1k1, 1k2, 1k3, 1k4, 1k5, 1k6, 1k7, 1k8 |
| 1 | Buzzer | Buzzer_15x7.5RM7.6 | BZ1 |
| 2 | DIPxx-1Axx-11x | Relay_StandexMeder_DIP_LowProfile | K1, K2 |
| 1 | LM16255K | LM16255 | LCD1 |
| 1 | Oxcegen % | Potentiometer_Bourns_3269W_Vertical | RV1 |
| 1 | BPM | Potentiometer_Bourns_3269W_Vertical | RV2 |
| 1 | Breath Length | Potentiometer_Bourns_3269W_Vertical | RV3 |
| 1 | O2 Auto | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | Power | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
| 1 | Transformer_1P_1S | Transformer_Toroid_Horizontal_D9.0mm_Amidon-T30 | T1 |
| 4 | DIODE | D_0201_0603Metric | D1, D2, D3, D4 |
| 1 | ABS4 | Diode_Bridge_Diotec_ABS | D5 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 2 | 1N4004 | D_DO-41_SOD81_P10.16mm_Horizontal | D7, D8 |
| 2 | 0.1uF | CP_Elec_3x5.3 | C1, C3 |
| 1 | 10uF | CP_Elec_3x5.3 | C2 |
| 5 | 470uF | C_Elec_3x5.4 | C4, C6, C7, C8, C9 |
| 1 | 2200uF | C_Elec_5x5.4 | C5 |
| 3 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 1 | 1.6k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
Smart-Ventilator design files
The KiCad project lives in the yesitha/Smart-Ventilator repository on GitHub; these links point at the commit this page was built from.
Smart-Ventilator: common questions
What microcontroller does the Smart-Ventilator use?
The Smart-Ventilator is built around the ATmega32-16A, from the AVR/Arduino family.
How big is the Smart-Ventilator PCB?
The Smart-Ventilator measures 156.3 × 179.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart-Ventilator?
69 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smart-Ventilator design files?
From the yesitha/Smart-Ventilator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Smart-Ventilator design in my own project?
The repository has no license, so all rights stay with yesitha. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart-Ventilator without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k