Motor Health Monitoring 8051
YUKESH0620·Motor_Health_Monitoring_8051_PCB·HARDWARE/PCB Layout/Motor_Health_Monitoring_PCB.kicad_pcb
About the Motor Health Monitoring 8051 PCB
Motor Health Monitoring 8051 is an open source PCB design by YUKESH0620, published on GitHub under the MIT license. It is a 4-layer board measuring 135.2 × 73.1 mm, with 99 components from 43 distinct parts.
Other key parts include the USBLC6-2SC6, MC7805CTG, CP2102N-Axx-xQFN20, LM7805_TO220 and L293D. By type, the board carries 33 resistors, 22 capacitors, 17 switches, 12 ICs, 5 LEDs and 4 connectors.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
Motor Health Monitoring PCB designed using KiCad. This repository contains the complete hardware design including schematic, PCB layout, custom libraries, manufacturing files, and design reports. The project focuses on condition monitoring of electric motors using multiple sensors. Firmware will be added in a future update.
Embedded Hardware–Firmware Co-Design Project
The Motor Health Monitoring System is an embedded systems project designed to monitor the operational health of an electric motor and protect it from unsafe conditions.
A structured hardware design Bare-metal embedded control logic Simulation-based validation Professional documentation practices
The focus is on learning, reliability, and design clarity, following workflows commonly used in industry and academia.
Main components on the Motor Health Monitoring 8051
Motor Health Monitoring 8051 bill of materials (BOM)
99 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | MC7805CTG ON Semiconductor | TO-220-3 | U2 |
| 1 | CP2102N-Axx-xQFN20 | QFN50P500X500X100-29N | U3 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | U4 |
| 1 | L293D | DIP880W50P254L2000H510Q16 | U5 |
| 1 | P8051AH | DIP-40_W15.24mm | U6 |
| 1 | DM-OLED096-636 | MODULE_DM-OLED096-636 | U7 |
| 1 | ACS770LCB-050B-PFF-T Allegro MicroSystems, LLC | CB-5_Formed_Leads | U8 |
| 1 | LM35DZ_LFT4 | IC_LM35DZ_LFT4 | U9 |
| 1 | TCRT5000L | XDCR_TCRT5000L | U10 |
| 1 | ADC082S051 | VSSOP-8_3x3mm_P0.65mm | U11 |
| 1 | LM741 | DIP794W45P254L959H508Q8 | U13 |
| 1 | SW-420 | SW-420 | X1 |
| 1 | 12MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 1 | SS-52400-002 | BELFUSE_SS-52400-002 | J2 |
| 1 | Conn_01x04_Socket | TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal | J3 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | 0ZCH0110AF2E | FUSC3226X100N | F1 |
| 1 | R_Potentiometer | Potentiometer_Bourns_3266Y_Vertical | RV1 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EG1218 E-Switch | Switch_Slide_11.6x4mm_EG1218 | S1 |
| 16 | SW_Push | SW_PUSH_1P1T_6x3.5mm_H5.0_APEM_MJTP1250 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8 |
| 5 | LTST-C170TBKT Lite-On Inc. | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED1, LED2, LED3, LED4, LED5 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 10 | 0.1u | C_0805_2012Metric | C1, C5, C7, C14, C15, C16, C17, C18 +2 |
| 1 | 1u | C_0805_2012Metric | C2 |
| 2 | 10u | T491A | C3, C6 |
| 1 | 4.7u | T491A | C4 |
| 1 | 10u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C8 |
| 1 | 4.7u | C_0805_2012Metric | C9 |
| 1 | 0.1u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C10 |
| 2 | 22pF | C_0805_2012Metric | C11, C12 |
| 1 | 10u | C_0805_2012Metric | C13 |
| 2 | 104 | C_0805_2012Metric | C19, C26 |
| 1 | 22k1 | R_0805_2012Metric | R1 |
| 1 | 47k5 | R_0805_2012Metric | R2 |
| 12 | 10k | R_0805_2012Metric | R3, R10, R11, R13, R21, R23, R24, R25 +4 |
| 3 | 470 | R_0805_2012Metric | R4, R32, R33 |
| 10 | 1k | R_0805_2012Metric | R5, R6, R12, R14, R15, R16, R17, R18 +2 |
| 2 | 5k1 | R_0805_2012Metric | R7, R9 |
| 1 | 100M | R_0805_2012Metric | R8 |
| 2 | 4k7 | R_0805_2012Metric | R19, R20 |
| 1 | 220 | R_0805_2012Metric | R22 |
Motor Health Monitoring 8051 design files
The KiCad project lives in the YUKESH0620/Motor_Health_Monitoring_8051_PCB repository on GitHub; these links point at the commit this page was built from.
Motor Health Monitoring 8051: common questions
How big is the Motor Health Monitoring 8051 PCB?
The Motor Health Monitoring 8051 measures 135.2 × 73.1 mm, has 4 copper layers and is 1.669994 mm thick.
How many components are on the Motor Health Monitoring 8051?
99 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Motor Health Monitoring 8051 design files?
From the YUKESH0620/Motor_Health_Monitoring_8051_PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Motor Health Monitoring 8051 design in my own project?
Yes, under the terms of its MIT license, which YUKESH0620 chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k