ROCKET-Spica
yumeno-robot·ROCKET-Spica·回路図/MCU_circuits/MCU_circuits.kicad_sch
About the ROCKET-Spica PCB
ROCKET-Spica is an open source ESP32 PCB design by yumeno-robot, published on GitHub. It is a board, with 67 components from 37 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the STM32F446RETx, ATmega328P-A and FT232RL. By type, the board carries 29 capacitors, 11 connectors, 10 resistors, 6 switches, 4 ICs and 3 diodes.
From the project
ロケガの開発用リポジトリ
2025 年 高校2年の時とある大学でロケット作ったのでそれのデータをまとめておきます。
写真データの中には私が撮ったものではないものが含まれます。 引用しないでください。
Main components on the ROCKET-Spica
ROCKET-Spica bill of materials (BOM)
67 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | ATmega328P-A | TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U4 |
| 2 | DTC114E | SOT-23-3 | Q1, Q2 |
| 1 | 8MHz | Y1 | |
| 1 | 16MHz | Y2 | |
| 1 | COLOR_program | J1 | |
| 3 | connect | J2, J6, J13 | |
| 1 | COLOR_to_PC | J3 | |
| 1 | POWER | J4 | |
| 1 | power_program | J5 | |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J7 |
| 1 | compiler | J8 | |
| 1 | UI_program | J11 | |
| 1 | power_ISP | J12 | |
| 1 | NRST_SW | SW_PUSH_6mm | SW1 |
| 1 | BOOT_SW | Nidec_Copal_CAS-120A | SW2 |
| 2 | SW_Push | SW_PUSH_6mm | SW3, SW4 |
| 1 | SW_Push | SW5 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_Nidec_CAS-120A1 | Nidec_Copal_CAS-120A | SW6 |
| 1 | D_Schottky | Nexperia_CFP3_SOD-123W | D1 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3 |
| 12 | 0.1uF | C1, C5, C6, C7, C8, C9, C10, C11 +4 | |
| 2 | 1pF | C2, C3 | |
| 1 | 1uF | C4 | |
| 6 | 0.1μF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14, C15, C16, C17, C28 |
| 2 | 22μF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19 |
| 2 | 22pF | C20, C21 | |
| 1 | 10uF | C22 | |
| 2 | 100nF | C23, C24 | |
| 1 | 10μF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 4 | 10K | R1, R2, R3, R5 | |
| 1 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1M | R6 | |
| 2 | 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
ROCKET-Spica design files
The KiCad project lives in the yumeno-robot/ROCKET-Spica repository on GitHub; these links point at the commit this page was built from.
ROCKET-Spica: common questions
What microcontroller does the ROCKET-Spica use?
The ROCKET-Spica is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How many components are on the ROCKET-Spica?
67 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the ROCKET-Spica design files?
From the yumeno-robot/ROCKET-Spica repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the ROCKET-Spica design in my own project?
The repository has no license, so all rights stay with yumeno-robot. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ROCKET-Spica without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k