MCT19
ZeniteSolar·MCT19·Hardware/KiCad/MCT19_Sensor_Project/MCT19.kicad_pcb
About the MCT19 PCB
MCT19 is an open source ESP8266 PCB design by ZeniteSolar, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 42.8 × 83.8 mm, with 24 components from 17 distinct parts.
Its main chip is the NodeMCU1.0(ESP-12E), from the ESP8266 family. Other key parts include the LM324, L7805 and LM35-LP. By type, the board carries 10 capacitors, 4 ICs, 4 resistors, 3 connectors, 2 transistors and 1 diode.
It belongs with the iot & wireless, sensors and power & battery designs in this gallery.
From the project
Modulo de controle de temperatura, com modulo wifi
Main components on the MCT19
MCT19 bill of materials (BOM)
24 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | L7805 | TO-220-3_Horizontal_TabDown_SMD | U2 |
| 1 | NodeMCU1.0(ESP-12E) | NodeMCU-LoLinV3 | U3 |
| 1 | LM35-LP | TO-92L_Inline | U4 |
| 1 | Irf530 | TO-220-3_Horizontal_TabDown_SMD | Q1 |
| 1 | SI2308CDS-T1-GE3 | SOT-23_Handsoldering | Q2 |
| 1 | Sensor | TerminalBlock_bornier-3_P5.08mm | J1 |
| 1 | Vin | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Fan | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | LL4148 | D_MiniMELF_Handsoldering | D2 |
| 3 | 1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C9, C10 |
| 4 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3, C7, C8 |
| 1 | 10u | C_2512_6332Metric_Pad1.52x3.35mm_HandSolder | C4 |
| 2 | 10n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 1 | 50k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 100k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 2 | 16k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
MCT19 design files
The KiCad project lives in the ZeniteSolar/MCT19 repository on GitHub; these links point at the commit this page was built from.
MCT19: common questions
What microcontroller does the MCT19 use?
The MCT19 is built around the NodeMCU1.0(ESP-12E), from the ESP8266 family.
How big is the MCT19 PCB?
The MCT19 measures 42.8 × 83.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MCT19?
24 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the MCT19 design files?
From the ZeniteSolar/MCT19 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MCT19 design in my own project?
Yes, under the terms of its GPL-3.0 license, which ZeniteSolar chose for the repository.
Can I test firmware for the MCT19 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398