Posture
zeyad-hisham-cyper·Freelance-Projects·Smart-Posture-Corrector/PCB/posture.kicad_pcb
About the Posture PCB
Posture is an open source ESP32 PCB design by zeyad-hisham-cyper, published on GitHub. It is a 2-layer board measuring 98.2 × 64.7 mm, with 27 components from 17 distinct parts.
Its main chip is the ESP32-DEVKITC-32E, from the ESP32 family. Other key parts include the GY-521 and GY-87. By type, the board carries 11 connectors, 5 resistors, 3 ICs, 2 transistors, 2 switches and 2 diodes.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
A two-board wearable that watches your back and neck angle with two IMUs, buzzes you when you slouch, and streams live posture data to a Flutter companion app over Bluetooth Low Energy.
A two-board wearable that watches your back and neck angle with two IMUs, buzzes you when you slouch, and streams live posture data to a Flutter companion app over Bluetooth Low Energy.
ESP32 · 2× MPU-6050 · complementary filter · haptic feedback · BLE GATT · Flutter · KiCad 9 · 1S Li-Po with TP4056 charging and MT3608 boost
The project began with a client specification (Smart Posture Corrector.docx) for a wearable aimed at doctors and dentists. These users spend long hours in strained working postures. The device needed to:

Main components on the Posture
Posture bill of materials (BOM)
27 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKITC-32E | MODULE_ESP32-DEVKITC-32E | U1 |
| 1 | GY-521 | GY-521 | U2 |
| 1 | GY-87 | GY-87 | U3 |
| 2 | Q_NPN_BEC | TO-92_Wide | Q1, Q2 |
| 2 | JST_Locking_6 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J1, J2 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3, J11 |
| 2 | JST_2mm_Motor | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4, J10 |
| 4 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J5, J6, J7, J8 |
| 1 | JST_2mm_LiPo | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | PTH_12x12mm_h8.0mm | SW_PUSH_6mm | SW1 |
| 1 | SW_SPDT | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW2 |
| 2 | 1N4001 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D3 |
| 1 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 10u | C_Radial_D5.0mm_H7.0mm_P2.00mm | C4 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R5 |
| 2 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4 |
| 1 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Posture design files
The KiCad project lives in the zeyad-hisham-cyper/Freelance-Projects repository on GitHub; these links point at the commit this page was built from.
Posture: common questions
What microcontroller does the Posture use?
The Posture is built around the ESP32-DEVKITC-32E, from the ESP32 family.
How big is the Posture PCB?
The Posture measures 98.2 × 64.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Posture?
27 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Posture design files?
From the zeyad-hisham-cyper/Freelance-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Posture design in my own project?
The repository has no license, so all rights stay with zeyad-hisham-cyper. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Posture without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Freelance-Projects
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k