Smart-Greenhouse agriculture system

ZIZO932·Smart-Greenhouse-agriculture-system·Circuit (Schematic and pcb)/cap 204.kicad_pcb

Smart-Greenhouse agriculture system PCB layout, top view — open source RP2040/RP2350 board by ZIZO932

About the Smart-Greenhouse agriculture system PCB

Smart-Greenhouse agriculture system is an open source RP2040/RP2350 PCB design by ZIZO932, published on GitHub. It is a 2-layer board measuring 144.5 × 153.5 mm, with 47 components from 28 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the ULN2803A, MAX485E, DS18B20, LM2596T-5 and AMS1117-3.3. By type, the board carries 14 resistors, 11 capacitors, 8 ICs, 7 relays, 2 modules and 2 connectors.

It belongs with the sensors designs in this gallery.

From the project

The Smart Greenhouse agriculture system uses a 4-layer design to protect crops like Basil from Egypt's heat and water shortages.

A greenhouse prototype I built to monitor growing conditions and control pumps, fans, lighting, and temperature hardware. I used sweet basil as the main crop for testing.

The project changed quite a bit between the CAD and the assembled version. The original design used a Raspberry Pi Pico W, and I switched to an ESP32 during the build after damaging the Pico. Both versions are kept in this repo.

Smart-Greenhouse agriculture system, from the project README
From the project README

Main components on the Smart-Greenhouse agriculture system

Smart-Greenhouse agriculture system bill of materials (BOM)

47 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ULN2803A
U1
1
MAX485E
U2
1
DS18B20
U3
1
LM2596T-5
U4
1
AMS1117-3.3
U5
1
BH1750
U6
1
RS485
U7
1
soil sensor
U8
1
RaspberryPi_Pico
A1
1
Fan
M1
1
Barrel_Jack
J1
1
Rasperry pi zero
J2
1
100nF
C_PICO1
7
SANYOU_SRD_Form_C
K1, K2, K3, K4, K5, K6, K7
1
1N5822
D1
1
330µH
L1
1
100µF/25V
C1
7
100nF
C2, C3, C6, C8, C9, C10, C12
1
220µF/10V
C4
2
10µF
C5, C7
Show 8 more
QtyPartRefs
4
Water pump
R1, R2, R5, R8
3
4.7kΩ
R3, R4, R9
2
560Ω
R6, R7
1
Heater
R10
1
Light bulb
R11
1
20kΩ
R12
1
10kΩ
R13
1
120Ω
R14

Smart-Greenhouse agriculture system design files

The KiCad project lives in the ZIZO932/Smart-Greenhouse-agriculture-system repository on GitHub; these links point at the commit this page was built from.

Smart-Greenhouse agriculture system: common questions

What microcontroller does the Smart-Greenhouse agriculture system use?

The Smart-Greenhouse agriculture system is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Smart-Greenhouse agriculture system PCB?

The Smart-Greenhouse agriculture system measures 144.5 × 153.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Smart-Greenhouse agriculture system?

47 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Smart-Greenhouse agriculture system design files?

From the ZIZO932/Smart-Greenhouse-agriculture-system repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Smart-Greenhouse agriculture system design in my own project?

The repository has no license, so all rights stay with ZIZO932. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Smart-Greenhouse agriculture system without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards