6 open source boards using the RS485
Real designs built with the RS485, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
STM32G431
Jana-Marie
60 × 44 mm154 parts4LCERN-OHL-1.29STM32
OtterStepMini
Jana-Marie
68.4 × 50 mm63 parts4LNo license5AVR/Arduino
EngineManagementSimpleWithMosfets
ieb
150 × 100 mm147 parts2LNo license1RP2040/RP2350
Smart-Greenhouse agriculture system
ZIZO932
144.5 × 153.5 mm47 parts2LNo license0STM32
PAC5523
Jana-Marie
60 × 44 mm126 parts4LCERN-OHL-1.29Raspberry Pi
PiCanBoard
ieb
106.7 × 61.6 mm45 parts2LNo license1
The RS485 in open source designs
The gallery holds 6 open source boards using the RS485 from 4 GitHub repositories; a typical one measures about 87.6 × 55.8 mm and carries around 95 components.
50% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is STM32G431 by Jana-Marie.
Parts used alongside the RS485
Microcontrollers on boards using the RS485
What boards using the RS485 are built for
RS485: common questions
Where can I find a RS485 reference design?
Each of the 6 boards on this page is a real design using the RS485. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RS485 use?
Most are built on STM32 (3), AVR/Arduino (1), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the RS485?
The median is 87.6 × 55.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the RS485?
By GitHub stars, STM32G431 by Jana-Marie, with 9 stars.
Can I simulate one of these boards using the RS485 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.