SOLIS1

Zoomwag·SOLIS1·PCB/Kicad/Solis1.kicad_pcb

SOLIS1 PCB layout, top view — open source ESP32 board by Zoomwag

About the SOLIS1 PCB

SOLIS1 is an open source ESP32 PCB design by Zoomwag, published on GitHub. It is a 4-layer board measuring 41.2 × 60 mm, with 69 components from 36 distinct parts.

Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the TPS22919DCKT, BQ25185DLHR, BMP390 and TPS631000DRLR. By type, the board carries 28 resistors, 21 capacitors, 7 connectors, 5 ICs, 3 diodes and 2 switches.

It belongs with the power & battery designs in this gallery.

From the project

A can sat

Solis 1 is my custom-built CanSat project, designed to fit all the main systems of a small satellite inside a compact cylindrical enclosure.

The project includes a custom flight computer PCB, a lightweight enclosure, onboard software, a recovery system and a ground station.

The aim of Solis 1 is to create a compact and system that can collect data during a test flight, transmit information back to the ground and safely return for recovery.

SOLIS1, from the project README
From the project README

Main components on the SOLIS1

SOLIS1 bill of materials (BOM)

69 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS22919DCKT
IC1
1
BQ25185DLHR
IC4
1
ESP32-S3-WROOM-1U-N16R8
IC5
1
BMP390
IC6
1
TPS631000DRLR
U3
1
MICRO_SD_CARD_DET1
Micro_SD_Card_Det1
J1
1
LORA MODULE
J2
1
CONN_01X03_PIN
Conn_01x03_Pin
J3
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J6
1
Battery
J7
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J9
1
Camera
J10
1
LSM6DSOTR
AC2
1
MF-NSMF075/8X-2
MF-NSMF075_8X-2
F2
2
SW_Push
SW5, SW6
2
LED
D1, D2
1
SS14-E3/5AT
D3
1
1UH
1uH
L2
4
10UF
10uF
C1, C5, C15, C22
8
100NF
100nF
C2, C4, C8, C23, C25, C26, C27, C28
Show 16 more
QtyPartRefs
3
1UF
1uF
C3, C21, C24
2
47UF
47uF
C6, C17
1
470UF
470uF
C7
2
2.2UF
2.2uF
C16, C19
1
22UF
22uF
C20
3
22
R1, R24, R25
3
100K
R2, R13, R22
11
10K
R3, R4, R5, R6, R7, R8, R9, R10 +3
1
0
R11
3
4.7K
R12, R26, R27
1
220
R14
2
5.1K
R15, R16
1
18K
R18
1
1K
R19
1
511K
R20
1
91K
R21

SOLIS1 design files

The KiCad project lives in the Zoomwag/SOLIS1 repository on GitHub; these links point at the commit this page was built from.

SOLIS1: common questions

What microcontroller does the SOLIS1 use?

The SOLIS1 is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.

How big is the SOLIS1 PCB?

The SOLIS1 measures 41.2 × 60 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SOLIS1?

69 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SOLIS1 design files?

From the Zoomwag/SOLIS1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SOLIS1 design in my own project?

The repository has no license, so all rights stay with Zoomwag. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SOLIS1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards