Probe
zuhayrl·EEE4022S_Thesis·PCB/Probe/probe_v5-0/probe.kicad_pcb
About the Probe PCB
Probe is an open source ESP32 PCB design by zuhayrl, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 73 components from 32 distinct parts.
Its main chip is the C3013906, from the ESP32 family. Other key parts include the C144198, C6186, C6187, C7950 and C128399. By type, the board carries 26 resistors, 23 capacitors, 11 ICs, 8 connectors, 2 switches and 2 diodes.
Main components on the Probe
Probe bill of materials (BOM)
73 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C144198 MCP4725xxx-xCH | SOT-23-6 | U1 |
| 1 | C6186 AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | C6187 AMS1117-5.0 | SOT-223-3_TabPin2 | U3 |
| 1 | C3013906 ESP32-S2-MINI-1 | ESP32-S2-MINI-1 | U4 |
| 2 | C7950 LM358 | SOIC-8_3.9x4.9mm_P1.27mm | U5, U9 |
| 4 | C128399 4xSwitch | TSSOP-14_4.4x5mm_P0.65mm | U6, U7, U8, U10 |
| 1 | C8963 SP3485EN | SOIC-8_3.9x4.9mm_P1.27mm | U12 |
| 1 | C5785272 MS583702BA01-50 | XDCR_MS583702BA01-50 | A1 |
| 1 | PWR | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | C404969 USB_B_Micro | SHOUHAN_MICROXNJ_Edited | J2 |
| 1 | TP | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Temp_Pads | 3-Wire Solder Pads | J4 |
| 1 | Data | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Inter Board | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | AU1 Au1 | Au_Electrode_edited_1 | J7 |
| 1 | AU2 Au2 | Au_Electrode_edited_1 | J8 |
| 1 | C720477 SW_En | SW_TS-1088-AR02016 | SW1 |
| 1 | C720477 SW_Boot | SW_TS-1088-AR02016 | SW2 |
| 1 | C8678 SS34 | D_SMA | D1 |
| 1 | C2286 LED | LED_0603_1608Metric | D4 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 15 | C1525 0.1uF | C_0402_1005Metric | C1, C3, C5, C8, C13, C14, C15, C16 +7 |
| 6 | C12891 22uF | C_1206_3216Metric | C2, C4, C6, C7, C9, C10 |
| 2 | C19702 10uF | C_0603_1608Metric | C11, C12 |
| 2 | C23179 470 | R_0603_1608Metric | R1, R2 |
| 2 | C21190 1K | R_0603_1608Metric | R5, R21 |
| 3 | C25804 10K | R_0603_1608Metric | R6, R7, R22 |
| 3 | C23025 300 | R_0603_1608Metric | R8, R9, R10 |
| 3 | C4211 3K | R_0603_1608Metric | R11, R12, R13 |
| 3 | C22984 30K | R_0603_1608Metric | R14, R15, R16 |
| 4 | C22950 20 | R_0603_1608Metric | R17, R18, R19, R20 |
| 1 | C22787 120 | R_0603_1608Metric | R23 |
| 5 | C23162 4.7K | R_0603_1608Metric | R24, R25, R26, R27, R28 |
Probe design files
The KiCad project lives in the zuhayrl/EEE4022S_Thesis repository on GitHub; these links point at the commit this page was built from.
Probe: common questions
What microcontroller does the Probe use?
The Probe is built around the C3013906, from the ESP32 family.
How big is the Probe PCB?
The Probe measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Probe?
73 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Probe design files?
From the zuhayrl/EEE4022S_Thesis repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Probe design in my own project?
The repository has no license, so all rights stay with zuhayrl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Probe without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in EEE4022S_Thesis
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k