Crabsy

ZVV2·Crabsy·electronics/crabsy_electronics.kicad_sch

Crabsy

About the Crabsy PCB

Crabsy is an open source ESP32 PCB design by ZVV2, published on GitHub under the CERN-OHL-P-2.0 license. It is a board, with 87 components from 17 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the PCA9685PW, MPU-6000 and OPA340NA. By type, the board carries 51 connectors, 18 modules, 5 ICs, 4 resistors, 2 capacitors and 1 buzzer.

It belongs with the robotics & motion designs in this gallery.

From the project

A hexapod robot designed to be taught by AI

A robotic crab, designed as a hexapod to be taught and controlled by AI.

This repo contains purely the hardware (construction, electronics and related calculations). The operating system CrabOS, the APIs CrabAPIs and the AI/simulation CrabRave each have their own repos.

A full documentation is available here. For further reading on the projects history and creation, read the project log. To get an overview over recent changes see the changelog.

Main components on the Crabsy

Crabsy bill of materials (BOM)

87 components, 17 distinct parts.

QtyPartRefs
2
PCA9685PW
U2, U5
1
ESP32-WROOM-32
U4
1
MPU-6000
U6
1
OPA340NA
U7
18
Motor_Servo
M1, M2, M3, M4, M5, M6, M7, M8 +10
32
Conn_01x03_Pin
J1, J2, J3, J4, J5, J6, J7, J8 +24
18
Conn_01x03_Socket
J17, J18, J19, J20, J21, J22, J23, J24 +10
1
USB_A
J54
1
Buzzer
BZ1
1
Raspberry Pi Zero 2
E-A1.U1
1
LiPo 7.4V
E-A1.U2.BT1
1
SW_DPST_x2
E-A1.U2.SW1
1
DC-DC Voltage Regulator
E-A1.U2.U1
1
Microphone
MK1
1
LED_RGBK
D1
2
C
C1, C2
4
R
R1, R2, R3, R4

Crabsy design files

The KiCad project lives in the ZVV2/Crabsy repository on GitHub; these links point at the commit this page was built from.

Crabsy: common questions

What microcontroller does the Crabsy use?

The Crabsy is built around the ESP32-WROOM-32, from the ESP32 family.

How many components are on the Crabsy?

87 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Crabsy design files?

From the ZVV2/Crabsy repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Crabsy design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which ZVV2 chose for the repository.

Can I test firmware for the Crabsy without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards