CHAOX-75

01HACKER01·Chaox-75-v2·pcb/CHAOX-75.kicad_pcb

CHAOX-75 PCB layout, top view — open source Nordic nRF board by 01HACKER01

About the CHAOX-75 PCB

CHAOX-75 is an open source Nordic nRF PCB design by 01HACKER01, published on GitHub. It is a 2-layer board measuring 360 × 130 mm, with 289 components from 33 distinct parts.

Its main chip is the nRF52840, from the Nordic nRF family. Other key parts include the AP2112K-3.3, MCP73831-2-OT and USBLC6-2SC6. By type, the board carries 165 diodes, 85 switches, 13 capacitors, 9 resistors, 4 ICs and 4 connectors.

It belongs with the displays & leds designs in this gallery.

From the project

Firmware for the CHAOX-75 keyboard, built using C and Zephyr RTOS with the nRF52840 platform.

Firmware for the CHAOX-75 keyboard, built using C and Zephyr RTOS with the nRF52840 platform.

This pre-release includes the keyboard matrix handling, key mappings, USB HID support, and function-layer shortcuts.

- Keyboard matrix handling (6 × 15) - Standard keyboard input over USB HID - Fn-layer key mappings - Media controls - Firmware binaries for flashing - SHA-256 checksums for file verification

CHAOX-75, from the project README
From the project README

Main components on the CHAOX-75

CHAOX-75 bill of materials (BOM)

289 components, 33 distinct parts.

QtyPartRefs
1
AP2112K-3.3
U1
1
MCP73831-2-OT
U2
1
USBLC6-2SC6
U3
1
nRF52840
U4
2
AO3401A
Q1, Q2
1
Crystal_Small
Y1
2
Conn_01x04_Pin
J1, J4
1
Conn_01x02_Pin
J2
1
USB_C_Receptacle_USB2.0_16P
J3
1
Antenna_Shield
AE1
1
MountingHole
ST59
1
MountingHole
ST76
82
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +74
1
SW_Push
SW100
1
SW_SPDT
SW101
1
RotaryEncoder_Switch_MP
SW102
1
1N5819W
D1
82
D
D2, D3, D4, D5, D6, D7, D9, D10 +74
82
SK6812MINI-E
D8, D85, D86, D87, D88, D89, D90, D91 +74
1
3.9nH
L1
Show 13 more
QtyPartRefs
1
10uH
L2
1
15nH
L3
7
100nF
C1, C7, C8, C9, C10, C11, C12
1
10uF
C2
1
1uF
C3
2
12pF
C4, C5
1
0.8pF
C6
1
4.7uF
C13
2
4.7k
R1, R2
2
5.1k
R3, R4
1
10k
R5
2
1M
R6, R7
2
100K
R8, R9

CHAOX-75 design files

The KiCad project lives in the 01HACKER01/Chaox-75-v2 repository on GitHub; these links point at the commit this page was built from.

CHAOX-75: common questions

What microcontroller does the CHAOX-75 use?

The CHAOX-75 is built around the nRF52840, from the Nordic nRF family.

How big is the CHAOX-75 PCB?

The CHAOX-75 measures 360 × 130 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CHAOX-75?

289 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the CHAOX-75 design files?

From the 01HACKER01/Chaox-75-v2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CHAOX-75 design in my own project?

The repository has no license, so all rights stay with 01HACKER01. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CHAOX-75 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in Chaox-75-v2

Similar boards