Dongle

01HACKER01·Chaox-75-v2·pcb/dongle.kicad_pcb

Dongle PCB layout, top view — open source Nordic nRF board by 01HACKER01

About the Dongle PCB

Dongle is an open source Nordic nRF PCB design by 01HACKER01, published on GitHub. It is a 2-layer board measuring 19 × 34.5 mm, with 20 components from 16 distinct parts.

Its main chip is the nRF52840, from the Nordic nRF family. Other key parts include the USBLC6-2SC6 and XC6206PxxxMR. By type, the board carries 10 capacitors, 3 ICs, 1 crystal, 1 connector, 1 antenna and 1 switch.

It belongs with the displays & leds designs in this gallery.

From the project

Firmware for the CHAOX-75 keyboard, built using C and Zephyr RTOS with the nRF52840 platform.

Firmware for the CHAOX-75 keyboard, built using C and Zephyr RTOS with the nRF52840 platform.

This pre-release includes the keyboard matrix handling, key mappings, USB HID support, and function-layer shortcuts.

- Keyboard matrix handling (6 × 15) - Standard keyboard input over USB HID - Fn-layer key mappings - Media controls - Firmware binaries for flashing - SHA-256 checksums for file verification

Dongle, from the project README
From the project README

Main components on the Dongle

Dongle bill of materials (BOM)

20 components, 16 distinct parts.

QtyPartRefs
1
USBLC6-2SC6
U1
1
XC6206PxxxMR
U2
1
nRF52840
U3
1
Crystal_GND24
Y1
1
USB_A
J1
1
Antenna
AE1
1
SW_Push
SW1
1
LED
D1
1
3.9nH
L1
3
4.7uF
C1, C3, C5
1
1uF
C2
1
100nF
C4
1
0.8pF
C6
2
10uF
C7, C9
2
12pF
C8, C10
1
1k
R1

Dongle design files

The KiCad project lives in the 01HACKER01/Chaox-75-v2 repository on GitHub; these links point at the commit this page was built from.

Dongle: common questions

What microcontroller does the Dongle use?

The Dongle is built around the nRF52840, from the Nordic nRF family.

How big is the Dongle PCB?

The Dongle measures 19 × 34.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dongle?

20 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dongle design files?

From the 01HACKER01/Chaox-75-v2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Dongle design in my own project?

The repository has no license, so all rights stay with 01HACKER01. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dongle without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in Chaox-75-v2

Similar boards