1337-v4.0
0xCB-dev·0xCB-1337·rev4.0/1337-v4.0.kicad_pcb
About the 1337-v4.0 PCB
1337-v4.0 is an open source AVR/Arduino PCB design by 0xCB-dev, published on GitHub under the Custom license license. It is a 2-layer board measuring 62 × 62 mm, with 53 components from 26 distinct parts.
Its main chip is the TPS2553DBVR, from the AVR/Arduino family. Other key parts include the USBLC6-2P6 and XC6210B332MR-G. By type, the board carries 14 capacitors, 13 diodes, 7 resistors, 3 ICs, 2 connectors and 2 inductors.
It belongs with the keyboards and displays & leds designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Mechanical macropad with OLED running QMK
Licence | OSHWA :-------------------------:|:-------------------------: | [](https://certification.oshwa.org/de000121.html)
qmk clone cd qmkfirmware export LTO=Y Press switch 1 while plugging in to go into dfu mode (or the reset button) make 0xcb/1337:via:flash
You can use the humanpnp to easily place components.
Top | Bottom :-------------------------:|:-------------------------: |

Main components on the 1337-v4.0
1337-v4.0 bill of materials (BOM)
53 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2P6 SSD1306 | 128x64OLED | U1 |
| 1 | XC6210B332MR-G USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | TPS2553DBVR ATMEGA32U4 | QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm_ThermalVias | U3 |
| 1 | 12MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_IN | molex2169900001 | J1 |
| 1 | C388698 AVR-ISP-6 | AVR_PROG_2.54_THT | J2 |
| 1 | C210357 1A | Fuse_0805_2012Metric | F1 |
| 8 | C5156480 MX | SW_Cherry_MX_PCB_1.00u | MX1, MX2, MX4, MX5, MX6, MX7, MX8, MX9 |
| 1 | EC11 | EC11 | MX3 |
| 1 | SW_Push | SW_SPST_TL3342 | SW1 |
| 8 | SK6812MINI-E | MX_SK6812MINI-E | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | WS2812B SMF5.0CA | D_SOD-123F | D9 |
| 4 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D10, D11, D12, D13 |
| 2 | 600R | Ferrite_Bead_0603 | FB1, FB2 |
| 1 | 100N 10u | C_0603_1608Metric | C1 |
| 7 | 100N 100n | C_0603_1608Metric | C2, C4, C6, C7, C8, C12, C14 |
| 3 | 100N 1u | C_0603_1608Metric | C3, C5, C9 |
| 1 | 10U 100n | C_0603_1608Metric | C10 |
| 1 | 10U 22p | C_0603_1608Metric | C11 |
| 1 | 100N 22p | C_0603_1608Metric | C13 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5K1 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 27R 22 | R_0603_1608Metric | R3 |
| 1 | 10K 22 | R_0603_1608Metric | R4 |
| 1 | 40K 10k | R_0603_1608Metric | R5 |
| 1 | 10k | R_0603_1608Metric | R6 |
| 1 | 10K 10k | R_Array_Convex_4x0603 | RN1 |
1337-v4.0 design files
The KiCad project lives in the 0xCB-dev/0xCB-1337 repository on GitHub; these links point at the commit this page was built from.
1337-v4.0: common questions
What microcontroller does the 1337-v4.0 use?
The 1337-v4.0 is built around the TPS2553DBVR, from the AVR/Arduino family.
How big is the 1337-v4.0 PCB?
The 1337-v4.0 measures 62 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 1337-v4.0?
53 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 1337-v4.0 design files?
From the 0xCB-dev/0xCB-1337 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 1337-v4.0 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the 1337-v4.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in 0xCB-1337
Earlier revisions in the repo: 1337-v3.0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k