HardLabs

Panel

0xCB-dev·0xCB-1337·rev4.0/panel/panel.kicad_pcb

Panel PCB layout, top view — open source AVR/Arduino board by 0xCB-dev
Simulate this board

About the Panel PCB

Panel is an open source AVR/Arduino PCB design by 0xCB-dev, published on GitHub under the Custom license license. It is a 2-layer board measuring 144 × 144 mm, with 53 components from 26 distinct parts.

Its main chip is the TPS2553DBVR, from the AVR/Arduino family. Other key parts include the USBLC6-2P6 and XC6210B332MR-G. By type, the board carries 14 capacitors, 13 diodes, 7 resistors, 3 ICs, 2 connectors and 2 inductors.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Mechanical macropad with OLED running QMK

Licence | OSHWA :-------------------------:|:-------------------------: | [](https://certification.oshwa.org/de000121.html)

qmk clone cd qmkfirmware export LTO=Y Press switch 1 while plugging in to go into dfu mode (or the reset button) make 0xcb/1337:via:flash

You can use the humanpnp to easily place components.

Top | Bottom :-------------------------:|:-------------------------: |

Panel, from the project README
From the project README

Main components on the Panel

USBLC6-2P6XC6210B332MR-GTPS2553DBVR

Panel bill of materials (BOM)

53 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2P6
SSD1306
U1
1
XC6210B332MR-G
USBLC6-2SC6
U2
1
TPS2553DBVR
ATMEGA32U4
U3
1
12MHZ
16MHz
Y1
1
USB_C_RECEPTACLE_USB2.0
USB_IN
J1
1
C388698
AVR-ISP-6
J2
1
C210357
1A
F1
8
C5156480
MX
MX1, MX2, MX4, MX5, MX6, MX7, MX8, MX9
1
EC11
MX3
1
SW_Push
SW1
8
SK6812MINI-E
D1, D2, D3, D4, D5, D6, D7, D8
1
WS2812B
SMF5.0CA
D9
4
WS2812B
D10, D11, D12, D13
2
600R
FB1, FB2
1
100N
10u
C1
7
100N
100n
C2, C4, C6, C7, C8, C12, C14
3
100N
1u
C3, C5, C9
1
10U
100n
C10
1
10U
22p
C11
1
100N
22p
C13
Show 6 more
QtyPartRefs
2
5K1
5.1k
R1, R2
1
27R
22
R3
1
10K
22
R4
1
40K
10k
R5
1
10k
R6
1
10K
10k
RN1

Panel design files

The KiCad project lives in the 0xCB-dev/0xCB-1337 repository on GitHub; these links point at the commit this page was built from.

Panel: common questions

What microcontroller does the Panel use?

The Panel is built around the TPS2553DBVR, from the AVR/Arduino family.

How big is the Panel PCB?

The Panel measures 144 × 144 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panel?

53 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Panel design files?

From the 0xCB-dev/0xCB-1337 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Panel design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in 0xCB-1337

Similar boards