Pcb
0xCB-dev·0xCB-1337·rev5.0/pcb.kicad_pcb
About the Pcb
Pcb is an open source RP2040/RP2350 PCB design by 0xCB-dev, published on GitHub under the Custom license license. It is a 4-layer board measuring 62 × 62 mm, with 114 components from 25 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the USBLC6-2P6, XC6210B332MR-G, TPS2553DBVR, SN74LVC1T45DRLR and W25Q32JVUUIQ. By type, the board carries 51 capacitors, 31 diodes, 11 resistors, 6 ICs, 2 connectors and 2 inductors.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
Mechanical macropad with OLED running QMK
Licence | OSHWA :-------------------------:|:-------------------------: | [](https://certification.oshwa.org/de000121.html)
qmk clone cd qmkfirmware export LTO=Y Press switch 1 while plugging in to go into dfu mode (or the reset button) make 0xcb/1337:via:flash
You can use the humanpnp to easily place components.
Top | Bottom :-------------------------:|:-------------------------: |

Main components on the Pcb
Pcb bill of materials (BOM)
114 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2P6 TECH PUBLIC | SOT-666 | U1 |
| 1 | XC6210B332MR-G Torex Semiconductor | SOT-23-5 | U2 |
| 1 | TPS2553DBVR | SOT95P280X145-6N | U3 |
| 1 | SN74LVC1T45DRLR 74LVC1T45 Texas Instruments | SOT-563 | U4 |
| 1 | W25Q32JVUUIQ Winbond | W25Q32JVUUIQ | U5 |
| 1 | RP2040 Raspberry Pi | RP2040-QFN-56 | U6 |
| 1 | 2TJ412000HYGBC 12MHz JYJE | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | GT-USB-7014C USB_C_Receptacle_USB2.0 G-Switch | GT-USB-7014C | J1 |
| 1 | C388698 FPC | FFC-SMD_12P-P0.50_X05B20U12T | J2 |
| 1 | MF-FSMF050X-2 1A BOURNS | Fuse_0603_1608Metric | F1 |
| 8 | C5156480 MX | SW_Hotswap_Kailh_1.00u | MX1, MX2, MX4, MX5, MX6, MX7, MX8, MX9 |
| 1 | EC11 | EC11 | MX3 |
| 8 | SK6812MINI-E | MX_SK6812MINI-E | D1, D2, D3, D4, D5, D6, D7, D8 |
| 23 | WS2812B-2020 WS2812B Worldsemi | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D9, D10, D11, D12, D13, D14, D15, D16 +15 |
| 2 | BLM15PX601SN1D 600R Murata Electronics | R_0402_1005Metric | FB1, FB2 |
| 44 | CL05B104KO5NNNC 100n Samsung Electro-Mechanics | C_0201_0603Metric | C1, C2, C3, C4, C5, C6, C7, C8 +36 |
| 3 | CL05A106MQ5NUNC 10u Samsung Electro-Mechanics | C_0402_1005Metric | C10, C11, C17 |
| 2 | CL05A105KA5NQNC 1u Samsung Electro-Mechanics | C_0201_0603Metric | C22, C26 |
| 2 | 0402CG150J500NT 15p FH(Guangdong Fenghua Advanced Tech) | C_0201_0603Metric | C37, C40 |
| 2 | 0402WGF5101TCE 5k1 UNI-ROYAL(Uniroyal Elec) | R_0201_0603Metric | R1, R2 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 0402WGF270JTCE 27R UNI-ROYAL(Uniroyal Elec) | R_0201_0603Metric | R3, R8, R9 |
| 2 | 0402WGF1002TCE 10k UNI-ROYAL(Uniroyal Elec) | R_0201_0603Metric | R4, R7 |
| 1 | 0402WGF1002TCE 75k UNI-ROYAL(Uniroyal Elec) | R_0201_0603Metric | R5 |
| 2 | 0402WGF1001TCE 1k UNI-ROYAL(Uniroyal Elec) | R_0201_0603Metric | R6, R10 |
| 1 | 10K 10k | R_Array_Convex_4x0603 | RN1 |
Pcb design files
The KiCad project lives in the 0xCB-dev/0xCB-1337 repository on GitHub; these links point at the commit this page was built from.
- Layoutrev5.0/pcb.kicad_pcb
- Schematicrev5.0/pcb.kicad_sch
- BOMrev5.0/kikit/prod/bom.csv
Pcb: common questions
What microcontroller does the Pcb use?
The Pcb is built around the RP2040, from the RP2040/RP2350 family.
How big is the Pcb?
The Pcb measures 62 × 62 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Pcb?
114 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pcb design files?
From the 0xCB-dev/0xCB-1337 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pcb design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Pcb without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in 0xCB-1337
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k