4 open source boards using the TPS7A1650DGNR

Real designs built with the TPS7A1650DGNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The TPS7A1650DGNR in open source designs

The gallery holds 4 open source boards using the TPS7A1650DGNR from 2 GitHub repositories; a typical one measures about 70 × 90 mm and carries around 42 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Bldc controller routed by 2AMLogic.

Parts used alongside the TPS7A1650DGNR

Microcontrollers on boards using the TPS7A1650DGNR

What boards using the TPS7A1650DGNR are built for

TPS7A1650DGNR: common questions

Where can I find a TPS7A1650DGNR reference design?

Each of the 4 boards on this page is a real design using the TPS7A1650DGNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS7A1650DGNR use?

Most are built on AVR/Arduino (4).

How big is a typical board using the TPS7A1650DGNR?

The median is 70 × 90 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS7A1650DGNR?

By GitHub stars, Bldc controller routed by 2AMLogic, with 77 stars.

Can I simulate one of these boards using the TPS7A1650DGNR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part