Mr flico

adamantbob·mr_flico

Mr flico

About the Mr flico PCB

Mr flico is an open source RP2040/RP2350 PCB design by adamantbob, published on GitHub. It is a 4-layer board, with 90 components from 52 distinct parts.

Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS, RFM95W-915S2, NEO-F10N, BMP581 and TPS82140. By type, the board carries 35 capacitors, 25 resistors, 10 ICs, 5 connectors, 5 diodes and 3 transistors.

It belongs with the rf & radio and sensors designs in this gallery.

From the project

KiCAD definition of MR.FLICO - Model Rocket FLIght COmputer

Model Rocket FLIght COmputer — An RP2350-based avionics PCB designed for high-reliability flight logging, telemetry, and recovery in model and high-power rocketry.

Designed in KiCad as the companion hardware for the rocketvR` Embassy-based Rust flight software.

Verified directly against the schematic netlists (RP2350.kicadsch, mikerocket.kicadsch`):

ECAD: KiCad 8.0+ Firmware: Companion firmware is developed in rocketvR using Rust with the Embassy async embedded framework. 3D Models: Footprint 3D models (.step / .stp) are stored in rocket.pretty/ and referenced relatively via…

Main components on the Mr flico

Mr flico bill of materials (BOM)

90 components, 52 distinct parts.

QtyPartRefs
1
RP2350A
U1
1
W25Q128JVS
U2
1
RFM95W-915S2
U4
1
NEO-F10N
U5
1
BMP581
U6
2
TPS82140
U7, U8
1
LM74700
U9
1
INA3221
U10
1
LSM6DSK320X
U11
1
BC857BS-7-F
Q1
1
SI1016X-T1-GE3
Q2
1
HL2306
Q3
1
ABM8-272-T3
Y1
1
Debug
J1
2
Conn_Coaxial
J2, J3
1
Micro_SD_Card
J4
1
XT30UPB-M
AMASS(艾迈斯)
J5
1
1.5A/16V
F1
1
BOOT
SW1
1
RESET
SW2
Show 32 more
QtyPartRefs
1
TestPoint
TP1
1
SMAJ9.0CA
D1
1
GREEN
D2
1
YELLOW
D3
1
RED
D4
1
BLUE
D5
1
3.3u
L1
1
47n
L2
1
47p
C1
2
15p
C17, C18
2
10u
C19, C40
1
10u
C23
1
10n
C25
3
4.7u
C38, C39, C58
24
100n
C54, C55, C56, C57, C59, C63, C64, C65 +16
1
100n
C60
1
33
R1
2
27
R2, R3
3
1k
R7, R8, R24
4
10k
R9, R13, R19, R23
1
50m
R10
1
20m
R11
1
10m
R12
1
2.2k
R14
1
220
R15
1
100k
R17
2
10k
R21, R22
2
10
R25, R26
1
10
RN1
1
YC164-FR-0760R4L
RN2
2
YC122-FR-0710RL
RN3, RN4
1
4D02WGJ0103TCE
RN5

Mr flico design files

The KiCad project lives in the adamantbob/mr_flico repository on GitHub; these links point at the commit this page was built from.

Mr flico: common questions

What microcontroller does the Mr flico use?

The Mr flico is built around the RP2350A, from the RP2040/RP2350 family.

How big is the Mr flico PCB?

The Mr flico has 4 copper layers and is 1.6 mm thick.

How many components are on the Mr flico?

90 components, from 52 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mr flico design files?

From the adamantbob/mr_flico repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mr flico design in my own project?

The repository has no license, so all rights stay with adamantbob. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mr flico without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards