Iggie driver
About the Iggie driver PCB
Iggie driver is an open source ESP8266 PCB design by adamgreig, published on GitHub. It is a 2-layer board measuring 162 × 162 mm, with 255 components from 28 distinct parts.
Its main chip is the ESP-12, from the ESP8266 family. Other key parts include the STM32F405RxTx, TSR 1-2450, ADuM1201 and 74HC595. By type, the board carries 96 transistors, 96 resistors, 23 capacitors, 14 connectors, 12 ICs and 9 crystals.
Main components on the Iggie driver
Iggie driver bill of materials (BOM)
255 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RxTx | LQFP-64 | IC101 |
| 1 | TSR 1-2450 | TSR1 | IC102 |
| 1 | ADuM1201 | SOIC-8 | IC103 |
| 1 | ESP-12 | ESP-12 | IC104 |
| 8 | 74HC595 | TSSOP-16 | IC701, IC702, IC703, IC704, IC705, IC706, IC707, IC708 |
| 64 | DMN60H080DS-7 | SOT-23 | Q301, Q302, Q304, Q306, Q307, Q308, Q310, Q312 +56 |
| 32 | PBHV9050T,215 | SOT-23 | Q303, Q305, Q309, Q311, Q315, Q317, Q321, Q323 +24 |
| 8 | M3 MOUNT | M3_MOUNT | X101, X102, X103, X104, X105, X106, X107, X108 |
| 1 | 26M | XTAL-25x20 | Y101 |
| 2 | PSU | MOLEX-KK-254P-04 | J101, J109 |
| 2 | HV | MOLEX-KK-254P-03 | J102, J108 |
| 1 | SREG_IN | MOLEX-PICOBLADE-53398-0871 | J103 |
| 1 | DRIVE | DIL-254P-16 | J104 |
| 1 | UART | MOLEX-PICOBLADE-53398-0471 | J105 |
| 1 | SREG_OUT | MOLEX-PICOBLADE-53398-0871 | J106 |
| 1 | ESP_FLASH | SIL-254P-05 | J107 |
| 1 | A_1_16 | IPL1-116-02-L-SH | J201 |
| 1 | A_17_32 | IPL1-116-02-L-SH | J202 |
| 2 | K_1_16 | IPL1-116-02-L-SH | J203, J204 |
| 1 | SWD | FTSH-105-01-F-D-K | P101 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TESTPAD | TESTPAD | TP101 |
| 3 | ESD_DIODE | 0603 | D101, D102, D103 |
| 1 | FB | 0603 | L101 |
| 16 | 100n | 0603 | C101, C103, C104, C106, C108, C113, C114, C115 +8 |
| 5 | 2µ2 | 0603 | C102, C105, C107, C109, C112 |
| 2 | 10µ | 1210 | C110, C111 |
| 64 | 10k | 1206 | R301, R302, R303, R304, R307, R308, R309, R310 +56 |
| 32 | 93k1 | 1206 | R305, R306, R311, R312, R317, R318, R323, R324 +24 |
Iggie driver design files
The KiCad project lives in the adamgreig/iggie repository on GitHub; these links point at the commit this page was built from.
Iggie driver: common questions
What microcontroller does the Iggie driver use?
The Iggie driver is built around the ESP-12, from the ESP8266 family.
How big is the Iggie driver PCB?
The Iggie driver measures 162 × 162 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Iggie driver?
255 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Iggie driver design files?
From the adamgreig/iggie repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Iggie driver design in my own project?
The repository has no license, so all rights stay with adamgreig. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Iggie driver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in iggie
STM32Psu
100 × 100 mm137 parts2LNo license0
Pmod hss
76.2 × 20.3 mm73 parts4LNo license0
STM32Minidriver
66 × 50 mm52 parts2LNo license0
Load
100 × 100 mm40 parts2LNo license0
Pmod lss
55.9 × 20.3 mm24 parts4LNo license0
FPGADriver
70 × 100 mm4 parts2LNo license0
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398