SDR-IOT-project

AfriOrbit·SDR-IOT-project·Hardware/IoT Edge Device v1.0/IoT Edge Device V1.kicad_pcb

SDR-IOT-project PCB layout, top view — open source ESP32 board by AfriOrbit

About the SDR-IOT-project PCB

SDR-IOT-project is an open source ESP32 PCB design by AfriOrbit, published on GitHub. It is a 4-layer board measuring 75.5 × 82.7 mm, with 88 components from 39 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the AMS1117-3.3, LM7805, IP5306, AI-THINKER-RA-02 and DHT11. By type, the board carries 25 capacitors, 19 resistors, 15 connectors, 15 diodes, 8 ICs and 3 switches.

It belongs with the rf & radio, iot & wireless and power & battery designs in this gallery.

From the project

This project includes all work materials for the SDR and IOT communication systems.

The flow diagram above shows data flow from the IoT Edge devices, through the CubeSat to a ground terminal.

Our key area of focus will be the IoT edge devices, LoRa Network and the SDR components to relay IoT data. A link budget will be done, and this will serve as the guide to the above architecture and design. This is separate from the CubeSat onboard communication system.

Main components on the SDR-IOT-project

SDR-IOT-project bill of materials (BOM)

88 components, 39 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
3
LM7805
U2, U3, U4
1
IP5306
U5
1
AI-THINKER-RA-02
Ai-Thinker-Ra-02
U6
1
DHT11
U7
1
BME280
U8
1
ESP32-S3-WROOM-1-N16R8
X1
1
WE-XTAL_85SMX
Y1
1
C2894326
USB_B_Micro
J1
1
Conn_01x06_Pin
J2
5
Conn_01x04_Pin
J3, J4, J5, J7, J8
2
Conn_01x03_Pin
J6, J16
2
Conn_01x02_Pin
J9, J14
3
Conn_01x02_Pin
J11, J12, J13
1
C719027
Micro_SD_Card
J15
3
SW_Push
SW1, SW2, SW3
1
C965799
LED
D1
1
SP0503BAHT
D2
6
DFLS130L-7
D3, D4, D5, D6, D7, D17
1
C965799
25%
D8
Show 19 more
QtyPartRefs
1
C965799
50%
D9
1
C965799
75%
D10
1
C22371297
100%
D11
1
C965807
LED
D12
1
C22371297
LED
D13
1
SS14
D14
1
1UH
1uH
L1
5
22UF
22uF
C1, C5, C18, C19, C20
10
0U1F
0u1F
C2, C8, C9, C11, C13, C15, C21, C22 +2
3
10UF
10uF
C4, C16, C17
2
10PF
10pF
C6, C7
3
0U33F
0u33F
C10, C12, C14
1
22UF/16V
22uF/16V
C23
1
1UF
1uF
C25
5
1k
R1, R7, R8, R9, R11
11
10K
10k
R2, R6, R10, R12, R13, R14, R15, R16 +3
1
C2906922
2R
R3
1
C137904
1R
R4
1
20R
R5

SDR-IOT-project design files

The KiCad project lives in the AfriOrbit/SDR-IOT-project repository on GitHub; these links point at the commit this page was built from.

SDR-IOT-project: common questions

What microcontroller does the SDR-IOT-project use?

The SDR-IOT-project is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How big is the SDR-IOT-project PCB?

The SDR-IOT-project measures 75.5 × 82.7 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the SDR-IOT-project?

88 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SDR-IOT-project design files?

From the AfriOrbit/SDR-IOT-project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SDR-IOT-project design in my own project?

The repository has no license, so all rights stay with AfriOrbit. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SDR-IOT-project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards