BNO055 08092019

Aharoni-Lab·Miniscope-v4·Development Files/Individual PCBs/Miniscope-v4-IMU/KiCad/BNO055_08092019/BNO055_08092019.kicad_pcb

BNO055 08092019 PCB layout, top view — open source AVR/Arduino board by Aharoni-Lab

About the BNO055 08092019 PCB

BNO055 08092019 is an open source AVR/Arduino PCB design by Aharoni-Lab, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 5.6 × 5 mm, with 8 components from 8 distinct parts.

Its main chip is the ATMEGA328-MU, from the AVR/Arduino family. By type, the board carries 4 capacitors, 2 resistors, 1 IC and 1 connector.

From the project

All things Miniscope v4

Main components on the BNO055 08092019

BNO055 08092019 bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328-MU
BNO055
U1
1
Conn_01x05
J1
1
GRM033R61A104ME15D
100nF
C1
1
GRM155R60J475ME47D
100nF
C2
1
GRM033R61A225ME47D
6.8nF
C3
1
GRM033R61A225ME47D
120nF
C4
1
ERJ-1GNF1022C
10K
R1
1
ERJ-1GNF1801C
10K
R2

BNO055 08092019 design files

The KiCad project lives in the Aharoni-Lab/Miniscope-v4 repository on GitHub; these links point at the commit this page was built from.

BNO055 08092019: common questions

What microcontroller does the BNO055 08092019 use?

The BNO055 08092019 is built around the ATMEGA328-MU, from the AVR/Arduino family.

How big is the BNO055 08092019 PCB?

The BNO055 08092019 measures 5.6 × 5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BNO055 08092019?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BNO055 08092019 design files?

From the Aharoni-Lab/Miniscope-v4 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the BNO055 08092019 design in my own project?

Yes, under the terms of its GPL-3.0 license, which Aharoni-Lab chose for the repository.

Can I test firmware for the BNO055 08092019 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Miniscope-v4

Similar boards