Miniscope v4-MCU

Aharoni-Lab·Miniscope-v4·Development Files/Individual PCBs/Miniscope-v4-MCU/KiCad/Miniscope-v4-MCU.kicad_pcb

Miniscope v4-MCU PCB layout, top view — open source AVR/Arduino board by Aharoni-Lab

About the Miniscope v4-MCU PCB

Miniscope v4-MCU is an open source AVR/Arduino PCB design by Aharoni-Lab, published on GitHub under the GPL-3.0 license. It is a 6-layer board measuring 7.5 × 8 mm, with 12 components from 6 distinct parts.

Its main chip is the ATMEGA328-MU, from the AVR/Arduino family. By type, the board carries 9 connectors, 2 capacitors and 1 IC.

From the project

All things Miniscope v4

The original PCB was designed along side the CMOS PCB and SER-Power PCB in CircuitStudio but I wanted to make some modifications to the MCU PCB as well as start porting all projects over to KiCad. The main changes from the original MCU PCB are the following: Added a 50mil 2x3 ISP interface for programming the Atmega328 without the need to solder wires. Changed the output of the board to interface with the dual digital potentiometer used on the LED + ETL Driver PCB.

Main components on the Miniscope v4-MCU

Miniscope v4-MCU bill of materials (BOM)

12 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328-MU
ATmega328-MU
U1
1
Conn_01x14
J1
7
Conn_01x01
J2, J3, J4, J5, J6, J7, J9
1
Conn_01x05
J8
1
GRM033R61A104ME15D
GRM155R71A104JA01D
C1
1
GRM155R60J475ME47D
GRM155R60J475ME87D
C2

Miniscope v4-MCU design files

The KiCad project lives in the Aharoni-Lab/Miniscope-v4 repository on GitHub; these links point at the commit this page was built from.

Miniscope v4-MCU: common questions

What microcontroller does the Miniscope v4-MCU use?

The Miniscope v4-MCU is built around the ATMEGA328-MU, from the AVR/Arduino family.

How big is the Miniscope v4-MCU PCB?

The Miniscope v4-MCU measures 7.5 × 8 mm, has 6 copper layers and is 0.7874 mm thick.

How many components are on the Miniscope v4-MCU?

12 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Miniscope v4-MCU design files?

From the Aharoni-Lab/Miniscope-v4 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Miniscope v4-MCU design in my own project?

Yes, under the terms of its GPL-3.0 license, which Aharoni-Lab chose for the repository.

Can I test firmware for the Miniscope v4-MCU without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Miniscope-v4

Similar boards