Miniscope v4-Rigid-Flex

Aharoni-Lab·Miniscope-v4·Miniscope-v4-Rigid-Flex/KiCad/Miniscope-v4-Rigid-Flex.kicad_pcb

Miniscope v4-Rigid-Flex PCB layout, top view — open source AVR/Arduino board by Aharoni-Lab

About the Miniscope v4-Rigid-Flex PCB

Miniscope v4-Rigid-Flex is an open source AVR/Arduino PCB design by Aharoni-Lab, published on GitHub under the GPL-3.0 license. It is a 6-layer board measuring 30 × 57.3 mm, with 109 components from 45 distinct parts.

Its main chip is the ATMEGA328-MU, from the AVR/Arduino family. Other key parts include the LTC3218, TPL0102-100RUCR, MAX14574EWL+, LMV321IDCKR and NOIP1SP0480A. By type, the board carries 58 capacitors, 16 resistors, 12 ICs, 10 connectors, 7 inductors and 3 diodes.

It belongs with the wearables designs in this gallery.

From the project

All things Miniscope v4

[Miniscope V4 Wiki] [Miniscope DAQ Software Wiki] [Miniscope DAQ Firmware Wiki] [Miniscope Wire-Free DAQ Wiki] [Miniscope-LFOV Wiki][2021 Virtual Miniscope Workshop Recording]

Open-source neural imaging in freely behaving animals

All information, guides, and tutorials can be found on the Miniscope-v4 Wiki Page.

Make sure to click Watch and Star in the upper right corner of this page to get updates on new features and releases.

Miniscope v4-Rigid-Flex, from the project README
From the project README

Main components on the Miniscope v4-Rigid-Flex

Miniscope v4-Rigid-Flex bill of materials (BOM)

109 components, 45 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328-MU
ATmega328-MU
U1
1
LTC3218
U2
1
TPL0102-100RUCR
U3
1
MAX14574EWL+
U4
1
LMV321IDCKR
U5
1
NOIP1SP0480A
U6
1
SG-210STF 66.6667ML3
U7
1
TLV7103318DSER
U8
1
DS90UB913ATRTVTQ1
U9
1
NCP163AMX330TBG
U10
1
PCA9509AGM
U11
1
BNO055
U12
1
MMBT3904LP-7B
Q1
7
DNL
J1, J2, J3, J4, J5, J6, J9
2
DNL
J11, J12
1
U.FL-R-SMT-1(10)
J17
1
DNL
J_coax_gnd1
1
DNL
J_extra1
1
LXZ1-PB01
D1
1
BAS316-TP
D2
Show 25 more
QtyPartRefs
1
VLMS1500-GS08
D3
1
MBKK1608T3R3M
L1
2
BLM18PG471SN1D
L2, L3
3
BLM15HD102SN1D
L4, L6, L7
1
ADL3225V-470MT-TL000
L5
27
GRM033R61A104ME15D
C1, C6, C8, C10, C11, C12, C13, C14 +19
5
GRM155R60J475ME47D
C2, C5, C7, C36, C39
2
GRM033R61A225ME47D
C3, C4
1
GRJ188R72A104KE11D
C9
6
GRM155R60J106ME15D
C15, C19, C23, C29, C30, C43
1
GRM188R61E475KE11D
C27
1
GRM033R61C473KE84D
C32
6
GRM033R61A105ME15D
C33, C34, C35, C42, C57, C58
6
GRM033R71A103KA01D
C38, C41, C45, C47, C49, C53
1
GRM21BR61A476ME15L
C50
1
DNL
C55
1
12PF
12pF
C56
1
ERJ-1GNF1022C
R1
4
ERJ-1GNF1801C
R2, R3, R4, R8
1
ERJ-1GNF1001C
R5
3
DNL
R6, R13, R14
1
ERJ-1GNF4752C
R7
1
ERJ-1GNF49R9C
R9
4
ERJ-1GNF1002C
R10, R12, R15, R16
1
ERJ-1GNF1003C
R11

Miniscope v4-Rigid-Flex design files

The KiCad project lives in the Aharoni-Lab/Miniscope-v4 repository on GitHub; these links point at the commit this page was built from.

Miniscope v4-Rigid-Flex: common questions

What microcontroller does the Miniscope v4-Rigid-Flex use?

The Miniscope v4-Rigid-Flex is built around the ATMEGA328-MU, from the AVR/Arduino family.

How big is the Miniscope v4-Rigid-Flex PCB?

The Miniscope v4-Rigid-Flex measures 30 × 57.3 mm, has 6 copper layers and is 0.8 mm thick.

How many components are on the Miniscope v4-Rigid-Flex?

109 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Miniscope v4-Rigid-Flex design files?

From the Aharoni-Lab/Miniscope-v4 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Miniscope v4-Rigid-Flex design in my own project?

Yes, under the terms of its GPL-3.0 license, which Aharoni-Lab chose for the repository.

Can I test firmware for the Miniscope v4-Rigid-Flex without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Miniscope-v4

Similar boards