Miniscope v4-PCB-fab assembly
Aharoni-Lab·Miniscope-v4·Development Files/Miniscope-v4-PCB-fab-assembly/Miniscope-v4-PCB-fab-assembly.kicad_pcb
About the Miniscope v4-PCB-fab assembly
Miniscope v4-PCB-fab assembly is an open source AVR/Arduino PCB design by Aharoni-Lab, published on GitHub under the GPL-3.0 license. It is a 6-layer board measuring 36 × 18.5 mm, with 41 components from 24 distinct parts.
Its main chip is the ATMEGA328-MU, from the AVR/Arduino family. Other key parts include the LTC3218 and TPL0102-100RUCR. By type, the board carries 19 capacitors, 10 connectors, 4 resistors, 3 ICs, 2 diodes and 2 inductors.
It belongs with the wearables designs in this gallery.
From the project
All things Miniscope v4
[Miniscope V4 Wiki] [Miniscope DAQ Software Wiki] [Miniscope DAQ Firmware Wiki] [Miniscope Wire-Free DAQ Wiki] [Miniscope-LFOV Wiki][2021 Virtual Miniscope Workshop Recording]
Open-source neural imaging in freely behaving animals
All information, guides, and tutorials can be found on the Miniscope-v4 Wiki Page.
Make sure to click Watch and Star in the upper right corner of this page to get updates on new features and releases.
Main components on the Miniscope v4-PCB-fab assembly
Miniscope v4-PCB-fab assembly bill of materials (BOM)
41 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA328-MU ATmega328-MU | QFN_33_P50_500X500X80L40X24T310L | U1 |
| 1 | LTC3218 NOIP1SN0480A | BGA88CP50_8X11_493X613X75B25 | U2 |
| 1 | TPL0102-100RUCR SiT_2.5mmx2mm | OSC_CC250X200X80L70X75L | U3 |
| 1 | MMBT3904LP-7B | TRXDFN3_101X61X53L25X15N | Q1 |
| 1 | Conn_01x14 | B2B_Flex_14_Dual_Row_38milx24mil_Pad_20mil | J1 |
| 7 | Conn_01x01 | Conn_1x1_700_Circular_Pad | J2, J3, J4, J5, J6, J7, J9 |
| 2 | Conn_01x05 | B2B_Flex_05_Dual_Row_38milx24mil_Pad_20mil | J8, J10 |
| 1 | LXZ1-PB01 LED_Small_ALT | LED_0402_1005Metric | D1 |
| 1 | BAS316-TP LXZ1-PR01 | LED_LXZ1_PR01_L | D2 |
| 1 | MBKK1608T3R3M BLM18PG471SN1D | L_0603_1608Metric_L | L1 |
| 1 | BLM18PG471SN1D | L_0603_1608Metric_L | L2 |
| 1 | GRM033R61A104ME15D GRM155R71A104JA01D | C_0402_1005Metric_L | C1 |
| 1 | GRM155R60J475ME47D GRM155R60J475ME87D | C_0402_1005Metric_L | C2 |
| 2 | GRM033R61A225ME47D GRM033R61A104ME15D | C_0201_0603Metric_L | C3, C4 |
| 2 | GRM155R60J475ME47D GRM033R61A104ME15D | C_0201_0603Metric_L | C5, C7 |
| 3 | GRM033R61A104ME15D GRM155R60J106ME15D | C_0402_1005Metric_L | C6, C10, C14 |
| 6 | GRM033R61A104ME15D | C_0201_0603Metric_L | C8, C11, C12, C13, C16, C18 |
| 1 | GRJ188R72A104KE11D GRM033R61A104ME15D | C_0201_0603Metric_L | C9 |
| 2 | GRM155R60J106ME15D GRM033R61A104ME15D | C_0201_0603Metric_L | C15, C19 |
| 1 | GRM033R61A104ME15D GRM188R61E475KE11D | C_0603_1608Metric_L | C17 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ERJ-1GNF1022C 1.8K | R_0201_0603Metric_ERJ_L | R1 |
| 1 | ERJ-1GNF1801C DNL | R_0201_0603Metric_ERJ_L | R2 |
| 1 | ERJ-1GNF1801C 47.7K | R_0201_0603Metric_ERJ_L | R3 |
| 1 | ERJ-1GNF1801C 1K | R_0201_0603Metric_ERJ_L | R4 |
Miniscope v4-PCB-fab assembly design files
The KiCad project lives in the Aharoni-Lab/Miniscope-v4 repository on GitHub; these links point at the commit this page was built from.
Miniscope v4-PCB-fab assembly: common questions
What microcontroller does the Miniscope v4-PCB-fab assembly use?
The Miniscope v4-PCB-fab assembly is built around the ATMEGA328-MU, from the AVR/Arduino family.
How big is the Miniscope v4-PCB-fab assembly?
The Miniscope v4-PCB-fab assembly measures 36 × 18.5 mm, has 6 copper layers and is 0.8 mm thick.
How many components are on the Miniscope v4-PCB-fab assembly?
41 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Miniscope v4-PCB-fab assembly design files?
From the Aharoni-Lab/Miniscope-v4 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Miniscope v4-PCB-fab assembly design in my own project?
Yes, under the terms of its GPL-3.0 license, which Aharoni-Lab chose for the repository.
Can I test firmware for the Miniscope v4-PCB-fab assembly without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Miniscope-v4
AVR/Arduino
Miniscope v4-Rigid-Flex
Aharoni-Lab
30 × 57.3 mm109 parts6LGPL-3.0161AVR/Arduino
Miniscope v4-PCB-fab assembly 2
Aharoni-Lab
35.5 × 45 mm62 parts6LGPL-3.0161AVR/Arduino
Miniscope v4-Ser-Pow
Aharoni-Lab
9 × 12.5 mm39 parts6LGPL-3.0161AVR/Arduino
Miniscope v4-PYTHON480
Aharoni-Lab
10.5 × 9 mm32 parts6LGPL-3.0161AVR/Arduino
MS v4 ETL LED Driver
Aharoni-Lab
6 × 10.5 mm20 parts6LGPL-3.0161AVR/Arduino
Miniscope v4-MCU
Aharoni-Lab
7.5 × 8 mm12 parts6LGPL-3.0161AVR/Arduino
BNO055 08092019
Aharoni-Lab
5.6 × 5 mm8 parts2LGPL-3.0161AVR/Arduino
Miniscope v4-VDD-PIX-FC
Aharoni-Lab
6.5 × 3.5 mm7 parts2LGPL-3.0161Miniscope v4-FlexPC
Aharoni-Lab
25.3 × 23.5 mm6 parts2LGPL-3.0161
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k