Paperflux
albanpetit·paperflux·ecad/ecad.kicad_pcb
About the Paperflux PCB
Paperflux is an open source ESP32 PCB design by albanpetit, published on GitHub. It is a 4-layer board measuring 33.5 × 50 mm, with 43 components from 30 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the TPD4E02B04DQA, AP33772S, AP63203WU and PCA9306. By type, the board carries 16 resistors, 10 capacitors, 5 ICs, 3 connectors, 3 diodes and 2 transistors.
It belongs with the power & battery designs in this gallery.
From the project
Open-hardware desk printer that prints your weekly GitHub stats on a thermal ticket: custom ESP32-C3 board with USB-C PD, PlatformIO firmware, Ruby web renderer, and a FreeCAD enclosure.
KiCad project for the PaperFlux board. It takes power from a USB-C PD charger, passes the negotiated voltage on to a thermal printer, and runs the firmware on an ESP32-C3.
The Espressif symbols and footprints come from a git submodule. Fetch it first, or the ESP32-C3 module will show as missing:
- AP33772S (U2) negotiates the PD contract over CC1/CC2, measures current through R6 and temperature through NTC1. It switches the output through the back-to-back MOSFETs Q1/Q2 (DMN3009SFG). - VCC, the switched output, feeds the printer terminal J3 and the AP63203 (U3) 3.3 V buck. The ESP32-C3 is…
Main components on the Paperflux
Paperflux bill of materials (BOM)
43 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPD4E02B04DQA | USON-10_2.5x1.0mm_P0.5mm | U1 |
| 1 | AP33772S | WQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U2 |
| 1 | AP63203WU | TSOT-23-6 | U3 |
| 1 | PCA9306 | TSSOP-8_3x3mm_P0.65mm | U4 |
| 1 | ESP32-C3-MINI-1 | ESP32-C3-MINI-1 | U6 |
| 2 | DMN3009SFG | Diodes_PowerDI3333-8 | Q1, Q2 |
| 1 | USB_C | USB_C_Receptacle_JAE_DX07S016JA1R1500 | J1 |
| 1 | Printer | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J2 |
| 1 | POWER | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | 10k@25C | R_0402_1005Metric | NTC1 |
| 1 | RESET | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | BOOT | SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 3 | LED_Small | LED_0402_1005Metric | D1, D2, D3 |
| 1 | 3.9U 3.9u | L_Wuerth_MAPI-3015 | L1 |
| 2 | 10U 10u | C_0805_2012Metric | C1, C4 |
| 3 | 100N 100n | C_0402_1005Metric | C2, C3, C8 |
| 1 | 1u | C_0402_1005Metric | C5 |
| 1 | 100P 100p | C_0402_1005Metric | C6 |
| 2 | 22U 22u | C_0805_2012Metric | C7, C9 |
| 1 | 100N 1u | C_0402_1005Metric | C10 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100K 100k | R_0402_1005Metric | R3, R17, R18 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R4, R5 |
| 1 | 5m | R_1206_3216Metric | R6 |
| 1 | 10 | R_0402_1005Metric | R7 |
| 1 | 1k | R_0402_1005Metric | R8 |
| 1 | 100 | R_0402_1005Metric | R9 |
| 4 | 2.2K 2.2k | R_0402_1005Metric | R10, R11, R13, R14 |
| 1 | 200K 200k | R_0402_1005Metric | R12 |
| 1 | 4.7K 4.7k | R_0402_1005Metric | R15 |
| 1 | 4.7K 10k | R_0402_1005Metric | R16 |
Paperflux design files
The KiCad project lives in the albanpetit/paperflux repository on GitHub; these links point at the commit this page was built from.
- Layoutecad/ecad.kicad_pcb
- Schematicecad/ecad.kicad_sch
- BOMdoc/bom.xlsx
Paperflux: common questions
What microcontroller does the Paperflux use?
The Paperflux is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the Paperflux PCB?
The Paperflux measures 33.5 × 50 mm, has 4 copper layers and is 1.579 mm thick.
How many components are on the Paperflux?
43 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Paperflux design files?
From the albanpetit/paperflux repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Paperflux design in my own project?
The repository has no license, so all rights stay with albanpetit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Paperflux without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k