Cryptick token

alphaseneca·cryptick-token-pcb

Cryptick token PCB layout, top view — open source ESP32 board by alphaseneca

About the Cryptick token PCB

Cryptick token is an open source ESP32 PCB design by alphaseneca, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 40 mm, with 50 components from 30 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the DS3231MZ+TRL, ME6217C33M5G, BQ25185DLHR and USBLC6-2SC6. By type, the board carries 21 resistors, 10 capacitors, 6 connectors, 5 ICs, 3 switches and 2 diodes.

It belongs with the iot & wireless, displays & leds and power & battery designs in this gallery.

From the project

Hardware schematics, 4-layer PCB layout, and manufacturing files for Cryptick Token — the 100% open-source biometric hardware security key and cryptographic hardware enclave.

Hardware schematics, 4-layer PCB layout, and manufacturing files for Cryptick Token — the 100% open-source biometric hardware security key and cryptographic hardware enclave.

- Main Processing Unit: Espressif ESP32-S3-WROOM-1 (N16R8) Dual-Core Xtensa LX7 @ 240 MHz with hardware cryptography accelerators (AES-256, SHA-256, RSA-3072, ECC point multiplication, TRNG) and 16 MB encrypted SPI Flash. - Biometric Security Enclave: R558S optical/capacitive fingerprint sensor (508 DPI, 120 on-sensor template slots, hardware wake-on-touch interrupt on GPIO 16). - Physical WYSIWYS Display: 0.96" 128x64…

Main components on the Cryptick token

Cryptick token bill of materials (BOM)

50 components, 30 distinct parts.

QtyPartRefs
1
DS3231MZ+TRL
DS3231MZ
MAXIM
U1
1
ESP32-S3-WROOM-1
U2
1
ME6217C33M5G
MICRONE(南京微盟)
U3
1
BQ25185DLHR
TI(德州仪器)
U4
1
USBLC6-2SC6
ST
U5
1
AO3400A
AP3404
AOS
Q1
1
YXT-BB10-24S-02
YXT(益鑫通)
CN1
1
SM02B-SRSS-TB(LF)(SN)
SM02B-SRSS-TB
JST
CN2
1
TYPE-C 16PIN 2MD(073)
USB_C_Receptacle_USB2.0_16P
SHOU HAN
J1
1
OLED DISPLAY
J3
1
1.0-6PS
Fingerprint_Sensor
DEALON
J4
1
1.0-6PS
JST-6 PIN-JST-SH
DEALON
J5
1
BS-12-A1AJ002-F
MYOUNG(美阳)
BT1
1
FPC-05F-20PH20
XUNPU(讯普)
FPC1
1
K1-5202UA-01
韩国韩荣
SW1
1
EC05E1220401
ALPSALPINE(阿尔卑斯阿尔派)
SW2
1
MSK12C02-HB
SHOU HAN(首韩)
SW3
1
XL-1608SURC-06
5V
XINGLIGHT
D1
1
PTVS5V0S1UR,115
PTVS5V0S1UR
Nexperia
D2
2
CL21A226MAYNNNE
22u
Samsung Electro-Mechanics
C1, C4
Show 10 more
QtyPartRefs
3
CL21B105KBFNNNE
1u
Samsung Electro-Mechanics
C2, C9, C10
3
CL21A106KAYNNNE
10u
Samsung Electro-Mechanics
C3, C7, C8
1
CL10B104KB8NNNC
100n
Samsung Electro-Mechanics
C5
1
CL10C330JB8NNNC
33p
Samsung Electro-Mechanics
C6
11
RC0603FR-0710KL
10K
YAGEO
R1, R2, R3, R4, R5, R6, R7, R8 +3
1
RC0603FR-07100RL
100R
YAGEO
R9
1
RC0603FR-0710RL
10R
YAGEO
R11
2
RC0603FR-075K1L
5K1
YAGEO
R12, R13
4
RC0603FR-071KL
1K
YAGEO
R14, R15, R17, R19
2
RC0603FR-0722RL
22R
YAGEO
R16, R18

Cryptick token design files

The KiCad project lives in the alphaseneca/cryptick-token-pcb repository on GitHub; these links point at the commit this page was built from.

Cryptick token: common questions

What microcontroller does the Cryptick token use?

The Cryptick token is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Cryptick token PCB?

The Cryptick token measures 80 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cryptick token?

50 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the Cryptick token design files?

From the alphaseneca/cryptick-token-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Cryptick token design in my own project?

Yes, under the terms of its MIT license, which alphaseneca chose for the repository.

Can I test firmware for the Cryptick token without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards