Desk-Display

ANSHUMANDOCX·Desk-Display·PCB/Desk Display.kicad_pcb

Desk-Display PCB layout, top view — open source ESP32 board by ANSHUMANDOCX

About the Desk-Display PCB

Desk-Display is an open source ESP32 PCB design by ANSHUMANDOCX, published on GitHub. It is a 2-layer board measuring 33.2 × 40 mm, with 63 components from 30 distinct parts.

Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the CH343P, RT9193-33 and ME6217C33M5G. By type, the board carries 21 capacitors, 21 resistors, 6 diodes, 5 transistors, 4 ICs and 3 switches.

It belongs with the displays & leds and iot & wireless designs in this gallery.

From the project

It is a desk display made using an E ink display.

It is a desk display made using an E-Ink display.

I will be using the following components:

- SEEKINK 5.83 inch display - ESP32 WROOM - CH343P USB-UART

I want to make a display that can show anything, but for me, I want it to display the current day, date, and time, along with a To-Do list at the bottom.

What I want to do is have the program fetch the day, date, and time details from the Wi-Fi network the ESP32 is connected to. For the To-Do list, I will use a website hosted on the ESP32 server to update the data whenever I want.

Desk-Display, from the project README
From the project README

Main components on the Desk-Display

Desk-Display bill of materials (BOM)

63 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32E
U1
1
CH343P
U2
1
RT9193-33
U3
1
ME6217C33M5G
U4
1
BSS138LT1G
Q1
3
SS8050
Q2, Q3, Q32
1
SI2301CDS-T1-E3
Q31
1
CONN_01X24
Conn_01x24
J3
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J4
1
SW_PUSH_DUAL_X2
SW_Push_Dual_x2
SW2
2
SW_Push
SW3, SW4
3
MBR0530
D1, D2, D4
1
1N5819WS
D3
2
LED
D5, D6
1
10UH
10uH
L1
10
1UF
C2, C5, C7, C9, C10, C11, C12, C13 +2
1
C_Small
C3
4
10UF
10uF
C4, C14, C20, C23
3
4.7UF
4.7uF
C6, C17, C19
1
104
C18
Show 10 more
QtyPartRefs
1
22NF
22nF
C21
1
47UF
47uF
C22
1
1k
R1
1
2.2K
2.2k
R2
9
10K
R3, R4, R5, R6, R8, R9, R13, R14 +1
1
0.47R
R7
2
NC
R10, R35
3
0R
R11, R12, R15
2
5.1K
R16, R17
2
100K
R33, R34

Desk-Display design files

The KiCad project lives in the ANSHUMANDOCX/Desk-Display repository on GitHub; these links point at the commit this page was built from.

Desk-Display: common questions

What microcontroller does the Desk-Display use?

The Desk-Display is built around the ESP32-WROOM-32E, from the ESP32 family.

How big is the Desk-Display PCB?

The Desk-Display measures 33.2 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Desk-Display?

63 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Desk-Display design files?

From the ANSHUMANDOCX/Desk-Display repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Desk-Display design in my own project?

The repository has no license, so all rights stay with ANSHUMANDOCX. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Desk-Display without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards