CO2Monitor

AntoG00·ESP32-C6-CO2-Monitor·V2/CO2Monitor.kicad_pcb

CO2Monitor PCB layout, top view — open source ESP32 board by AntoG00

About the CO2Monitor PCB

CO2Monitor is an open source ESP32 PCB design by AntoG00, published on GitHub under the MIT license. It is a 2-layer board measuring 47.7 × 51.2 mm, with 51 components from 25 distinct parts.

Its main chip is the ESP32-C6-MINI-1-H8, from the ESP32 family. Other key parts include the USBLC6-2SC6, SN74AHCT1G125DBVR and AP63203WU. By type, the board carries 20 capacitors, 14 resistors, 4 ICs, 4 diodes, 3 connectors and 2 transistors.

It belongs with the sensors, displays & leds and iot & wireless designs in this gallery.

From the project

Low-power CO2, temperature and humidity monitor using ESP32-C6 and E-Paper display.

This is the second hardware revision of the project. V2 replaces the SCD43 + SHT45 combo with a single Sensirion SEN66 environmental sensor and upgrades the display.

- MCU: Espressif ESP32‑C6 Mini - Wi‑Fi 6 + BLE / 802.15.4 capable (WiFi 6, Zigbee, Thread) - Sensor: Sensirion SEN66 - PM1, PM2.5, PM4, PM10 - Temperature, Relative Humidity - VOC Index, NOx Index, CO₂ - Display: Pervasive Displays 4.2" Spectra E2417QS0A3 - 3‑color E‑Ink - Status LED: Inolux IN‑PI33TBTPRPGPB multi‑color LED - Used for debug / status indication via color patterns

Main components on the CO2Monitor

CO2Monitor bill of materials (BOM)

51 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
STMicroelectronics
U1
1
SN74AHCT1G125DBVR
Texas Instruments
U2
1
AP63203WU
Diodes Incorporated
U3
1
ESP32-C6-MINI-1-H8
ESP32-C6-MINI-1/U
Espressif Systems
U4
1
SI1308EDL-T1-GE3
Si1308EDL
Vishay
Q1
1
SI2301-TP
Micro Commercial Components (MCC)
Q2
1
FH34SRJ-24S-0.5SH50
Hirose Connector
J1
1
USB4145-03-0230-C
USB_C_Receptacle_USB2.0_16P
GCT
J2
1
SM06B-GHS-TB
Conn_01x06
JST Commercial
J3
2
2-1437565-8
TE Connectivity / P&B
SW1, SW2
3
SS2040FL_R1_00001
SS2040FL
Panjit
D1, D2, D3
1
IN-PI33TBTPRPGPB
Inolux
D4
1
SRN4018-100M
10 uH
Bourns
L1
1
SRN5040-4R7M
3.9 uH
Bourns
L2
8
1µF 50V
C1, C2, C3, C4, C5, C6, C7, C13
2
4.7µF 25V
C8, C9
5
0.1µF 16V
C10, C12, C15, C17, C18
3
10µF 16V
C11, C14, C16
2
22µF 10V
C19, C20
1
0.47Ω 1%
R1
Show 5 more
QtyPartRefs
1
100kΩ
R2
2
5.1kΩ
R3, R4
6
10kΩ
R5, R6, R7, R8, R11, R12
3
22Ω
R9, R10, R14
1
1kΩ
R13

CO2Monitor design files

The KiCad project lives in the AntoG00/ESP32-C6-CO2-Monitor repository on GitHub; these links point at the commit this page was built from.

CO2Monitor: common questions

What microcontroller does the CO2Monitor use?

The CO2Monitor is built around the ESP32-C6-MINI-1-H8, from the ESP32 family.

How big is the CO2Monitor PCB?

The CO2Monitor measures 47.7 × 51.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CO2Monitor?

51 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CO2Monitor design files?

From the AntoG00/ESP32-C6-CO2-Monitor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CO2Monitor design in my own project?

Yes, under the terms of its MIT license, which AntoG00 chose for the repository.

Can I test firmware for the CO2Monitor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ESP32-C6-CO2-Monitor

Similar boards