Room Monitor C6

AntoG00·ESP32-C6-CO2-Monitor·V1/Room_Monitor_C6.kicad_pcb

Room Monitor C6 PCB layout, top view — open source ESP32 board by AntoG00

About the Room Monitor C6 PCB

Room Monitor C6 is an open source ESP32 PCB design by AntoG00, published on GitHub under the MIT license. It is a 4-layer board measuring 38.2 × 60.7 mm, with 39 components from 22 distinct parts.

Its main chip is the USBLC6-2SC6, from the ESP32 family. Other key parts include the SN74AHCT1G125DBVR, AP63203WU, ESP32-C6-MINI-1-H8, TLV75733PDBV and SS2040FL. By type, the board carries 15 capacitors, 11 resistors, 6 ICs, 2 connectors, 2 switches and 1 transistor.

It belongs with the sensors, displays & leds and iot & wireless designs in this gallery.

From the project

Low-power CO2, temperature and humidity monitor using ESP32-C6 and E-Paper display.

A high-precision, open-hardware environmental monitor designed to track CO2, Temperature, and Humidity levels. The device is built around the RISC-V based ESP32-C6 and features a raw E-Paper panel with a custom-designed boost driver to ensure zero light pollution and minimal thermal self-heating.

1. Thermal Isolation (Mechanical/Electrical): To prevent the heat generated by the MCU and voltage regulators from biasing the sensitive SHT45 and SCD43 readings, the sensors are physically isolated on the PCB using milling slots (thermal cutouts) and thin connecting bridges. 2. Custom E-Paper…

Room Monitor C6, from the project README
From the project README

Main components on the Room Monitor C6

Room Monitor C6 bill of materials (BOM)

39 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
ESP32-C6-MINI-1/U
STMicroelectronics
U1
1
SN74AHCT1G125DBVR
SHT4x
Texas Instruments
U2
1
AP63203WU
SCD43-D-R2
Diodes Incorporated
U3
1
ESP32-C6-MINI-1-H8
USBLC6-2SC6
Espressif Systems
U4
1
TLV75733PDBV
U6
1
SS2040FL
U7
1
SI1308EDL-T1-GE3
AO3400A
Vishay
Q1
1
FH34SRJ-24S-0.5SH50
USB_C_Receptacle_USB2.0_16P
Hirose Connector
J1
1
SM06B-GHS-TB
FH34SRJ-24S-0.5SH_99_
JST Commercial
J3
1
0.47Ω
R_Sense1
2
2-1437565-8
SW_SPST
TE Connectivity / P&B
SW1, SW2
1
SRN4018-100M
10µH
Bourns
L1
2
10µF
C1, C2
1
22µF
C3
4
0.1µF
C4, C6, C7, C14
1
1µF
C5
7
1µF 50V
C8, C9, C10, C11, C12, C13, C15
2
4.7kΩ
R1, R2
2
5.1kΩ
R3, R4
4
10kΩ
R5, R6, R7, R11
Show 2 more
QtyPartRefs
2
22Ω
R8, R9
1
100kΩ
R10

Room Monitor C6 design files

The KiCad project lives in the AntoG00/ESP32-C6-CO2-Monitor repository on GitHub; these links point at the commit this page was built from.

Room Monitor C6: common questions

What microcontroller does the Room Monitor C6 use?

The Room Monitor C6 is built around the USBLC6-2SC6, from the ESP32 family.

How big is the Room Monitor C6 PCB?

The Room Monitor C6 measures 38.2 × 60.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Room Monitor C6?

39 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Room Monitor C6 design files?

From the AntoG00/ESP32-C6-CO2-Monitor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Room Monitor C6 design in my own project?

Yes, under the terms of its MIT license, which AntoG00 chose for the repository.

Can I test firmware for the Room Monitor C6 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ESP32-C6-CO2-Monitor

Similar boards