HardLabs

PCB Pompe V2

AREA-Amiens·AREA.old-boards-hardware·PCB_Pompe_V2/PCB_Pompe_V2.kicad_pcb

PCB Pompe V2 layout, top view — open source STM32 board by AREA-Amiens

About the PCB Pompe V2

PCB Pompe V2 is an open source STM32 PCB design by AREA-Amiens, published on GitHub. It is a 2-layer board measuring 89.8 × 59.3 mm, with 193 components from 22 distinct parts.

Its main chip is the STM32F302C6Tx, from the STM32 family. Other key parts include the SN65HVD232 and NCP1117-3.3_SOT223. By type, the board carries 64 diodes, 64 resistors, 30 transistors, 19 connectors, 11 capacitors and 3 ICs.

From the project

Hardware for AREA.old boards

Main components on the PCB Pompe V2

SN65HVD232STM32F302C6TxNCP1117-3.3_SOT223

PCB Pompe V2 bill of materials (BOM)

193 components, 22 distinct parts.

QtyPartRefs
1
SN65HVD232
U1
1
STM32F302C6Tx
U2
1
NCP1117-3.3_SOT223
U3
30
DMN10H700S
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +22
1
8MHz
Y1
2
Conn_01x04_Female
J1, J2
15
Conn_01x03_Female
J3, J4, J5, J6, J7, J9, J10, J11 +7
1
Conn_01x02_Male
J8
1
Conn_01x05_Female
J13
1
Jumper_2_Open
JP1
33
LED_DEBUG
D1, D4, D5, D8, D9, D12, D13, D16 +25
1
D_TVS_x2_AAC
D2
30
D
D3, D6, D7, D10, D11, D14, D15, D18 +22
2
18pF
C1, C2
5
100nF
C3, C5, C7, C13, C14
1
10µF
C4
2
10u
C8, C9
1
470µF/50V
C10
30
10k
R1, R5, R6, R9, R10, R13, R14, R17 +22
2
220
R2, R22
Show 2 more
QtyPartRefs
31
560
R3, R4, R7, R8, R11, R12, R15, R16 +23
1
120
R21

PCB Pompe V2 design files

The KiCad project lives in the AREA-Amiens/AREA.old-boards-hardware repository on GitHub; these links point at the commit this page was built from.

PCB Pompe V2: common questions

What microcontroller does the PCB Pompe V2 use?

The PCB Pompe V2 is built around the STM32F302C6Tx, from the STM32 family.

How big is the PCB Pompe V2?

The PCB Pompe V2 measures 89.8 × 59.3 mm, has 2 copper layers and is 1.6002 mm thick.

How many components are on the PCB Pompe V2?

193 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB Pompe V2 design files?

From the AREA-Amiens/AREA.old-boards-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PCB Pompe V2 design in my own project?

The repository has no license, so all rights stay with AREA-Amiens. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB Pompe V2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in AREA.old-boards-hardware

Similar boards