HardLabs

PCB ESP32 CAN

AREA-Amiens·AREA.old-boards-hardware·PCB_ESP32_CAN/PCB_ESP32_CAN.kicad_pcb

PCB ESP32 CAN layout, top view — open source ESP32 board by AREA-Amiens

About the PCB ESP32 CAN

PCB ESP32 CAN is an open source ESP32 PCB design by AREA-Amiens, published on GitHub. It is a 2-layer board measuring 52.2 × 67.2 mm, with 47 components from 25 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the CP2102N-A01-GQFN24, SN65HVD232 and NCP1117-3.3_SOT223. By type, the board carries 15 capacitors, 15 resistors, 5 connectors, 5 diodes, 4 ICs and 2 transistors.

From the project

Hardware for AREA.old boards

Main components on the PCB ESP32 CAN

ESP32-WROOM-32CP2102N-A01-GQFN24SN65HVD232NCP1117-3.3_SOT223

PCB ESP32 CAN bill of materials (BOM)

47 components, 25 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
CP2102N-A01-GQFN24
U2
1
SN65HVD232
U3
1
NCP1117-3.3_SOT223
U4
2
Q_NPN_BCE
Q1, Q2
1
USB_C_Receptacle_USB2.0
J1
2
CAN
J2, J3
2
CAN
J4, J5
1
JUMP
JP1
1
LED_RX
D1
1
LED_TX
D2
1
LED_33V
D3
1
LED_5V
D4
1
TVS
D5
3
1n
C1, C2, C12
6
10u
C3, C7, C8, C9, C13, C14
2
47p
C4, C6
4
100n
C5, C10, C11, C15
3
560
R1, R6, R14
5
10K
R2, R5, R7, R11, R12
Show 5 more
QtyPartRefs
2
5.1K
R3, R4
1
470
R8
2
270
R9, R13
1
260
R10
1
120
R15

PCB ESP32 CAN design files

The KiCad project lives in the AREA-Amiens/AREA.old-boards-hardware repository on GitHub; these links point at the commit this page was built from.

PCB ESP32 CAN: common questions

What microcontroller does the PCB ESP32 CAN use?

The PCB ESP32 CAN is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the PCB ESP32 CAN?

The PCB ESP32 CAN measures 52.2 × 67.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB ESP32 CAN?

47 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB ESP32 CAN design files?

From the AREA-Amiens/AREA.old-boards-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PCB ESP32 CAN design in my own project?

The repository has no license, so all rights stay with AREA-Amiens. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB ESP32 CAN without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in AREA.old-boards-hardware

Similar boards