HardLabs

Carte Principale

AREA-Amiens·AREA.old-boards-hardware·PCB_Principal_V2/Carte Principale.kicad_pcb

Carte Principale PCB layout, top view — open source NXP board by AREA-Amiens

About the Carte Principale PCB

Carte Principale is an open source NXP PCB design by AREA-Amiens, published on GitHub. It is a board measuring 80 × 65 mm, with 44 components from 22 distinct parts.

Its main chip is the TEENSY_3.5_3.6_BASIC, from the NXP family. Other key parts include the SN65HVD232D, DRV8825, XBEE and CONDO2-5. By type, the board carries 11 connectors, 8 capacitors, 7 resistors, 6 ICs, 4 LEDs and 1 fuse.

From the project

Hardware for AREA.old boards

Main components on the Carte Principale

SN65HVD232DDRV8825TEENSY_3.5_3.6_BASICXBEECONDO2-5

Carte Principale bill of materials (BOM)

44 components, 22 distinct parts.

QtyPartRefs
1
SN65HVD232D
IC2
2
DRV8825
U$1, U$2
1
TEENSY_3.5_3.6_BASIC
U$5
1
XBEE
U$12
1
CONDO2-5
U$13
2
MOLEX_4DROIT
J1, J2
3
MOLEX_3DROIT
J3, J4, J5
1
645002117322
J6
1
Serial extern
J7
2
62000411622
J9, J13
2
22-?-0527-2051
J10, J11
4
TPB1,27
CANH1, CANL1, C_RX1, C_TX1
1
3557-2
F1
1
434111025826
S3
1
SJ
SJ1
4
LEDCHIPLED_0805
LED6, LED7, RX1, TX1
1
5Vdc
D1
6
100n
C1, C2, C3, C4, C5, C6
2
100µ
C7, C8
1
120
R1
Show 2 more
QtyPartRefs
4
R-EU_R0805
R2, R3, R5, R8
2
4.7k
R4, R6

Carte Principale design files

The KiCad project lives in the AREA-Amiens/AREA.old-boards-hardware repository on GitHub; these links point at the commit this page was built from.

Carte Principale: common questions

What microcontroller does the Carte Principale use?

The Carte Principale is built around the TEENSY_3.5_3.6_BASIC, from the NXP family.

How big is the Carte Principale PCB?

The Carte Principale measures 80 × 65 mm and is 1.6002 mm thick.

How many components are on the Carte Principale?

44 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Carte Principale design files?

From the AREA-Amiens/AREA.old-boards-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Carte Principale design in my own project?

The repository has no license, so all rights stay with AREA-Amiens. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Carte Principale without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in AREA.old-boards-hardware

Similar boards