Rmeasure V1 Board
About the Rmeasure V1 Board
Rmeasure V1 Board is an open source STM32 PCB design by AREA-Amiens, published on GitHub. It is a board measuring 58 × 28.5 mm, with 43 components from 26 distinct parts.
Its main chip is the STM32F302C6Tx, from the STM32 family. Other key parts include the NCP1117-3.3_SOT223 and SN65HVD232. By type, the board carries 16 capacitors, 12 resistors, 5 connectors, 5 diodes, 3 ICs and 1 crystal.
From the project
Hardware for AREA.old boards
Main components on the Rmeasure V1 Board
Rmeasure V1 Board bill of materials (BOM)
43 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F302C6Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | SN65HVD232 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | 8MHz | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | CON_debug | Wuerth_2.54mm_4pins_61900411121 | J2 |
| 1 | Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P1.27mm_Vertical | J3 |
| 2 | CON_CAN | 690367290476 | J4, J5 |
| 1 | JUMPER | PinHeader_1x02_P2.54mm_Vertical | 120 |
| 1 | LED_33V | LED_0805_2012Metric | D1 |
| 1 | LED_5V | LED_0805_2012Metric | D2 |
| 1 | LED_DEBUG | LED_0805_2012Metric | D3 |
| 1 | LED_RGB | LED_RGB_LTRBRASF6B6C011200R18 | D4 |
| 1 | TVS | SOT-23 | D5 |
| 2 | 18p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 10u | CP_Radial_D4.0mm_P2.00mm | C3, C5 |
| 1 | 0.1u | C_0805_2012Metric | C4 |
| 4 | 10u | C_0805_2012Metric | C6, C8, C11, C15 |
| 5 | 100n | C_0805_2012Metric | C7, C9, C10, C12, C16 |
| 2 | 47p | C_0805_2012Metric | C13, C14 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 270 | R_0805_2012Metric | R1, R3, R5, R6, R7, R8 |
| 1 | 10k | R_0805_2012Metric | R2 |
| 1 | 1.5k | R_0805_2012Metric | R4 |
| 1 | 1k | R_0805_2012Metric | R9 |
| 1 | 120 | R_0805_2012Metric | R10 |
| 2 | 5.1k | R_0805_2012Metric | R11, R12 |
Rmeasure V1 Board design files
The KiCad project lives in the AREA-Amiens/AREA.old-boards-hardware repository on GitHub; these links point at the commit this page was built from.
Rmeasure V1 Board: common questions
What microcontroller does the Rmeasure V1 Board use?
The Rmeasure V1 Board is built around the STM32F302C6Tx, from the STM32 family.
How big is the Rmeasure V1 Board?
The Rmeasure V1 Board measures 58 × 28.5 mm and is 1.6002 mm thick.
How many components are on the Rmeasure V1 Board?
43 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rmeasure V1 Board design files?
From the AREA-Amiens/AREA.old-boards-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Rmeasure V1 Board design in my own project?
The repository has no license, so all rights stay with AREA-Amiens. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rmeasure V1 Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in AREA.old-boards-hardware
STM32PCB Pompe V2
89.8 × 59.3 mm193 parts2LNo license0
STM32IO Board V1
79 × 49.5 mm88 parts2LNo license0
Carte Alim V4
111.1 × 60 mm57 parts2LNo license0
STM32Sensor v2-board
55.3 × 46 mm47 parts2LNo license0
ESP32PCB ESP32 CAN
52.2 × 67.2 mm47 parts2LNo license0
NXPCarte Principale
80 × 65 mm44 partsNo license0
NXPGatling-V2-board
65 × 45 mm28 parts2LNo license0
NXPAX12 Teensy V1
60 × 41.4 mm20 parts2LNo license0
NXPLidar-V2-board
54.8 × 29 mm15 parts2LNo license0
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k