HardLabs

Sensor v2-board

AREA-Amiens·AREA.old-boards-hardware·sensor-v2-board/sensor-v2-board/sensor-v2-board.kicad_pcb

Sensor v2-board layout, top view — open source STM32 board by AREA-Amiens

About the Sensor v2-board

Sensor v2-board is an open source STM32 PCB design by AREA-Amiens, published on GitHub. It is a 2-layer board measuring 55.3 × 46 mm, with 47 components from 24 distinct parts.

Its main chip is the STM32F042K6Tx, from the STM32 family. Other key parts include the NCP1117-3.3_SOT223 and SN65HVD232. By type, the board carries 18 capacitors, 13 resistors, 7 connectors, 3 ICs, 3 LEDs and 1 crystal.

It belongs with the sensors designs in this gallery.

From the project

Hardware for AREA.old boards

Main components on the Sensor v2-board

NCP1117-3.3_SOT223SN65HVD232STM32F042K6Tx

Sensor v2-board bill of materials (BOM)

47 components, 24 distinct parts.

QtyPartRefs
1
NCP1117-3.3_SOT223
U1
1
SN65HVD232
U2
1
STM32F042K6Tx
U3
1
8MHz
Y1
3
Conn_01x03_Male
J1, J2, J3
1
Conn_01x02_Male
J4
2
Conn_01x04_Male
J5, J6
1
USB_B_Micro
J8
1
Jumper_2_Open
120
3
5vpLED
3V3, 5V, 5VP
1
D_TVS_x2_AAC
D5
2
10µF
C1, C4
3
10µF
C2, C3, C5
2
18pF
C6, C7
1
0.1µF
C8
4
100nF
C9, C12, C13, C16
2
4.7µF
C10, C11
1
1µF
C14
1
10nF
C15
2
47pF
C17, C18
Show 4 more
QtyPartRefs
8
270
R1, R2, R3, R7, R8, R9, R10, R11
3
10k
R4, R12, R13
1
120
R5
1
1.5k
R6

Sensor v2-board design files

The KiCad project lives in the AREA-Amiens/AREA.old-boards-hardware repository on GitHub; these links point at the commit this page was built from.

Sensor v2-board: common questions

What microcontroller does the Sensor v2-board use?

The Sensor v2-board is built around the STM32F042K6Tx, from the STM32 family.

How big is the Sensor v2-board?

The Sensor v2-board measures 55.3 × 46 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sensor v2-board?

47 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sensor v2-board design files?

From the AREA-Amiens/AREA.old-boards-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Sensor v2-board design in my own project?

The repository has no license, so all rights stay with AREA-Amiens. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Sensor v2-board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in AREA.old-boards-hardware

Similar boards