AxxSolder
AxxAxx·AxxSolder·AxxSolder_hardware/AxxSolder.kicad_pcb
About the AxxSolder PCB
AxxSolder is an open source STM32 PCB design by AxxAxx, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 39 × 82.5 mm, with 122 components from 44 distinct parts.
Its main chip is the STM32G431CBT6, from the STM32 family. Other key parts include the TLV76733DRVR, OPA2387DSGT, LMR54406DBVR, TPD4E1U06DBVR and STUSB4500QTR. By type, the board carries 47 resistors, 36 capacitors, 11 ICs, 10 diodes, 6 connectors and 3 transistors.
It belongs with the power & battery designs in this gallery.
From the project
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
Interested in purchasing an AxxSolder 3.2? On my website 5Dimensions you can purchase assembled and tested AxxSolder 3.2 boards with connectors and hardware.
AxxSolder handles this by alternating between heating and measuring. Forty times a second a timer interrupt turns the heater off, waits 0.5 ms for the signal to settle, and triggers the ADC. The heater is switched back on as soon as the conversion is finished. The measurement window is short compared to the 25 ms between measurements, so very little heating power is lost and the control loop still gets a clean reading every cycle. On a…

Main components on the AxxSolder
AxxSolder bill of materials (BOM)
122 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV76733DRVR Texas Instruments | SON65P200X200X80-7N | IC1 |
| 1 | OPA2387DSGT Texas Instruments | SON50P200X200X80-9N | IC2 |
| 1 | LMR54406DBVR Texas Instruments | SOT95P280X145-6N | IC3 |
| 1 | STM32G431CBT6 STMicroelectronics | QFP50P900X900X160-48N | IC4 |
| 1 | TPD4E1U06DBVR Texas Instruments | SOT95P280X145-6N | IC5 |
| 1 | STUSB4500QTR STMicroelectronics | QFN50P400X400X100-25N-D | IC6 |
| 1 | MAX16171ATA/VY+T MAX16171ATA_VY+T Analog Devices | SON50P300X200X80-9N | IC7 |
| 1 | LTC4440AHMS8E-5#PBF LTC4440AHMS8E Analog Devices | SOP65P490X110-9N | IC8 |
| 1 | INA281A5QDBVRQ1 Texas Instruments | SOT95P280X145-5N | IC9 |
| 1 | PEC11J-9215F-S0015 CUI Devices | PEC11J9215FS0015 | U2 |
| 1 | BSC014N04LSATMA1 BSC014N04LS Infineon Technologies | BSC014N04LS | U3 |
| 1 | STL9P3LLH6 STMicroelectronics | STL9P3LLH6 | Q1 |
| 1 | STL10N3LLH5 STMicroelectronics | STL10N3LLH5 | Q2 |
| 1 | 2N7002NXAKR Nexperia | SOT95P230X110-3N | Q3 |
| 1 | USB4110-GF-A GCT | USB4110GFA | J1 |
| 1 | 691243110009 Wurth Elektronik | 691243110009 | J2 |
| 1 | 61300611821 Wurth Elektronik | RHDR6W97P0X254_1X6_1574X250X865P | J4 |
| 2 | TSW-102-07-T-S SAMTEC | TSW-102-XX-YY-S | J5, J6 |
| 1 | TSW-108-07-T-S SAMTEC | TSW-108-XX-YY-S | J7 |
| 1 | 0154007.DR LITTELFUSE | 0154100DR | F1 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SF-2410FP100W-2 Bourns | SF2410FP100W2 | F2 |
| 1 | CMI-9653S-SMT-TR CUI Devices | CMI9653SSMTTR | LS1 |
| 3 | ADTSM644RVTR | ADTSM644RVTR | S1, S2, S3 |
| 1 | 4311 ~ Adafruit | Adafruit_240x320_TFT | TFT1 |
| 2 | BAV199WQ-7 Diodes Incorporated | SOT65P210X110-3N | D1, D2 |
| 2 | SMF4L24AT1G LITTELFUSE | SODFL3619X98N | D3, D4 |
| 4 | BAT54S,215 BAT54S Diotec Semiconductor | SOT95P230X110-3N | D5, D6, D7, D8 |
| 2 | PMEG6020ER,115 PMEG6020ER Nexperia | PMEG6020ER115 | D9, D10 |
| 1 | BLM18HE601SN1D Murata Electronics | R_0603_1608Metric | FB1 |
| 1 | SRP7028CC-150M Bourns | INDPM7366X300N | L1 |
| 16 | GRM188R6YA106MA73J 10u Murata Electronics | C_0603_1608Metric | C1, C2, C5, C7, C8, C10, C11, C12 +8 |
| 17 | C0603C104J5RACTU 100n KEMET | C_0603_1608Metric | C3, C9, C14, C15, C16, C17, C18, C21 +9 |
| 2 | C0603C102K3GAC 1n KEMET | C_0603_1608Metric | C4, C6 |
| 1 | EEV227M035A9MAA 220u KEMET | CAPAE830X1050N | C37 |
| 4 | ERJ-H3ED1501V 1k5 Panasonic | R_0603_1608Metric | R1, R5, R14, R17 |
| 4 | ERJ-3RED3603V 360k Panasonic | R_0603_1608Metric | R2, R7, R8, R9 |
| 2 | ERJ-3RED2203V 220k Panasonic | R_0603_1608Metric | R3, R10 |
| 20 | ERJ-3RBD4701V 4k7 Panasonic | R_0603_1608Metric | R4, R6, R18, R19, R20, R22, R23, R25 +12 |
| 5 | ERJ-UP3J223V 22k Panasonic | R_0603_1608Metric | R11, R12, R15, R21, R24 |
| 7 | ERJ-P03F1000V 100 Panasonic | R_0603_1608Metric | R13, R16, R34, R43, R46, R47, R48 |
| 1 | WSLP25125L000FEA 5m Vishay | RESC6432X89N | R42 |
| 1 | ERJ-6GEYJ105V 1M Panasonic | R_0805_2012Metric | R44 |
| 1 | ERJ-6DSFR10V 100m Panasonic | R_0805_2012Metric | R45 |
| 2 | ERJ-3RED10R0V 10 Panasonic | R_0603_1608Metric | R49, R50 |
AxxSolder design files
The KiCad project lives in the AxxAxx/AxxSolder repository on GitHub; these links point at the commit this page was built from.
AxxSolder: common questions
What microcontroller does the AxxSolder use?
The AxxSolder is built around the STM32G431CBT6, from the STM32 family.
How big is the AxxSolder PCB?
The AxxSolder measures 39 × 82.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AxxSolder?
122 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AxxSolder design files?
From the AxxAxx/AxxSolder repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AxxSolder design in my own project?
Yes, under the terms of its GPL-3.0 license, which AxxAxx chose for the repository.
Can I test firmware for the AxxSolder without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in AxxSolder
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k