2 open source boards using the INA281A5QDBVRQ1
Real designs built with the INA281A5QDBVRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k- schematic only · 122 partsSTM32
Kicad skidl assignment
rajsrivastava9801-blip
122 partsNo license0
The INA281A5QDBVRQ1 in open source designs
The gallery holds 2 open source boards using the INA281A5QDBVRQ1 from 2 GitHub repositories; a typical one measures about 39 × 82.5 mm and carries around 122 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is AxxSolder by AxxAxx.
Parts used alongside the INA281A5QDBVRQ1
Microcontrollers on boards using the INA281A5QDBVRQ1
What boards using the INA281A5QDBVRQ1 are built for
INA281A5QDBVRQ1: common questions
Where can I find a INA281A5QDBVRQ1 reference design?
Each of the 2 boards on this page is a real design using the INA281A5QDBVRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the INA281A5QDBVRQ1?
The BSC014N04LSATMA1, LMR54406DBVR, LTC4440AHMS8E-5#PBF, MAX16171ATA/VY+T and OPA2387DSGT appear in the most repositories here.
Which microcontrollers do boards using the INA281A5QDBVRQ1 use?
Most are built on STM32 (2).
How big is a typical board using the INA281A5QDBVRQ1?
The median is 39 × 82.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the INA281A5QDBVRQ1?
By GitHub stars, AxxSolder by AxxAxx, with 1,714 stars.
Can I simulate one of these boards using the INA281A5QDBVRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.