2 open source boards using the OPA2387DSGT
Real designs built with the OPA2387DSGT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k- schematic only · 122 partsSTM32
Kicad skidl assignment
rajsrivastava9801-blip
122 partsNo license0
The OPA2387DSGT in open source designs
The gallery holds 2 open source boards using the OPA2387DSGT from 2 GitHub repositories; a typical one measures about 39 × 82.5 mm and carries around 122 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is AxxSolder by AxxAxx.
Parts used alongside the OPA2387DSGT
Microcontrollers on boards using the OPA2387DSGT
What boards using the OPA2387DSGT are built for
OPA2387DSGT: common questions
Where can I find a OPA2387DSGT reference design?
Each of the 2 boards on this page is a real design using the OPA2387DSGT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the OPA2387DSGT?
The BSC014N04LSATMA1, INA281A5QDBVRQ1, LMR54406DBVR, LTC4440AHMS8E-5#PBF and MAX16171ATA/VY+T appear in the most repositories here.
Which microcontrollers do boards using the OPA2387DSGT use?
Most are built on STM32 (2).
How big is a typical board using the OPA2387DSGT?
The median is 39 × 82.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the OPA2387DSGT?
By GitHub stars, AxxSolder by AxxAxx, with 1,714 stars.
Can I simulate one of these boards using the OPA2387DSGT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.