4 open source boards using the LM66100
Real designs built with the LM66100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Modular-Power-USBC
domesticmouse
52 × 24 mm23 parts2LCERN-OHL-S-2.00ESP32
NewRicardBlackBox
icl-rocketry
124.7 × 36.8 mm65 parts4LNo license0ESP32
RicardoTemplate
icl-rocketry
127 × 36.8 mm65 parts2LNo license0STM32
Active host test
azonenberg
100 × 60 mm93 parts4LBSD-3-Clause193
The LM66100 in open source designs
The gallery holds 4 open source boards using the LM66100 from 3 GitHub repositories; a typical one measures about 112.3 × 36.8 mm and carries around 65 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Active host test by azonenberg.
What boards using the LM66100 are built for
LM66100: common questions
Where can I find a LM66100 reference design?
Each of the 4 boards on this page is a real design using the LM66100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM66100 use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the LM66100?
The median is 112.3 × 36.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the LM66100?
By GitHub stars, Active host test by azonenberg, with 193 stars.
Can I simulate one of these boards using the LM66100 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.